Correct Replacement Grease Seals for Dexter 4400 Lb Capacity Axle
Published 08/28/2021
Products Featured in This Question
Question:
I see you had suggested p/n 58846 seals for this axle however the description says this is for 3500lb. Axles. So Im confused. I want to make sure I get the proper seals for my 2019 Grand Design Imagine 2800bh with 4400lb Dexter axles. I will be repacking the bearings therefore need the proper seals. Thank you
asked by: Philip B
Expert Reply:
The hubs used by the Dexter 4400 lb axle are 3500 lb hubs that have had their weight capacity upgraded by using a LM67048 outer wheel bearing. A 4400 hub like the # 8-407-5UC3-EZ would use the same # 58846 grease seal as a 3500 lb hub would.
Long story short, the correct grease seal for your Dexter 4400 lb axle would indeed be the # 58846.
Product Page this Question was Asked From
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.72 Inch I.D.
- 2.57 Inch O.D.
- etrailer
more information >
Continue Researching
- Search Results: dexter grease seal
- Search Results: 3" coupler
- Search Results: kitchen faucet
- Shop: B&B Projected Slip Fitting for RV Waste Tank - 3" - Black
- Q&A: Is There a Replacement Spindle For a Dexter D44, 4400LB Trailer Axle?
- Search Results: dexter 4400 axle
- Search Results: 6 lug drum
- Search Results: rv stoves and ovens
- Shop: Greystone Freestanding Propane RV Range - 3 Burners - 35-15/16" Tall - Stainless Steel
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 6 on 5-1/2 Bolt Pattern - 95" Long - 5,200 lbs
- Shop: Lippert Venture Lead Leg Repair Kit for 5th Wheel RV Landing Gear
- Shop: Dexter Trailer Axle w/ Electric Brakes - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" - 3,500 lbs
- Video: Hands-On with the Valterra ABS Solvent Cement
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Video: Trailer Axle with Idler Hubs Spec Review
- Q&A: Replacement Brake Drum Hub Assembly For Dexter D44 4,400LB Axle
- Q&A: Middle Jack Isn't Working on a Lippert 3.0 LC675817
- Q&A: Replacement Controller for Lippert Components 6-Point Ground Control 2.0 Electric Leveling System
- Q&A: Troubleshooting Middle Jacks Of Lippert Ground Control 2.0 System Not Retracting After Battery Died
- Video: An In-Depth Look at the Dexter Trailer Axle w/ Electric Brakes
- Q&A: Trailer Hub that has Bearing Numbers LM67048 and L68149
- Q&A: Grease Seal Needed for a Dexter 4,400 lb Axle
- Search Results: 568861
- Video: A Closer Look at the Replacement Trailer Hub Bearing
- Video: In-Depth Review of the Spindle Nut for Axles with 7/8"
- Video: In-Depth Review of the Grease Cap, 2.44" OD Drive In with Plug
- Video: All You Need to Know About the Grease Cap, 2.44" OD Drive In
- Article: Most Popular Wheel Bearings
- Shop: Roof Rack