Troubleshooting Furrion Vision S Wireless RV Camera FOS43TASF Not Pairing After Vehicle Battery Died

Published 08/27/2021

Question:

I have tried reparing multiple times. I even removed the camera to unplug it and tried repair more times. Still not seeing anything on the monitor?

asked by: Dan S

Expert Reply:

There is a few things to check.

First when trying to pair the Furrion Vision S Wireless RV Backup Camera System # FOS43TASF you will first need to make sure that the camera is getting power. This system is either wired in to the reverse light circuit or running light circuit on your trailer so you will need to make sure that either the trailer is in reverse, or the running lights are turned on when trying to pair the system.

Next make sure that the 12v outlet you have the monitor plugged into is getting power, you can test this by trying a different outlet or checking the fuse box in your tow vehicle and looking for a blown fuse.

Assuming you have power to both components I recommend doublechecking that the trailer connector is securely plugged into your 7-way connector.

If the issue still persists after these troubleshooting just let me know and we can go into more in-depth troubleshooting steps if needed.

Attached is a video review of the # FOS43TASF for you to take a look at.