Solution for RV Lend a Hand Handle that Has Broken Spring

Question

Question:

I have one of these that came on my 2019 TT. Its really loose and I was wondering if you offer replacement springs

asked by: William C

0

Expert Reply:

The springs of the RV grab handles like the Camco Fold Away RV Grab Handle # CAM42175 aren't replaceable so in our situation you'd have to replace the entire handle.

expert reply by: Jameson C

0

Answer 1

If the black base to the Lend-a-Hand Folding Grab Handle for RVs #AM-200 is loose it sounds like you will need to tighten the two screws that attach the handrail to your trailer. The screws will be phillips head screws and with a phillips screwdriver…

view full answer...

Answer 2

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 3

Hello Bruce, Thanks for writing in! Using butyl tape between the trailer body and the Single Axle Jeep Style Trailer Fender - Diamond Plate Aluminum - 13" to 15" #HP96VR is exactly the route I would go. It stays flexible, creates an…

view full answer...

Answer 4

Hey Brian! Yes, the Firestone Ride-Rite Air Helper Springs #F89VV will fit your 2025 Toyota Tundra. That is just the generic picture attached to that page, I can see how it would be confusing. These are designed to mount over the axle, and are…

view full answer...

Answer 5

Hey Edgar, so we have pretty similar designs to the part #TP48KR in different colors that are the same size. For darker we have #TP98KR More like a light gray #TP78KR Lighter tan #TP68KR Darker brown and leather #TP32KR

view full answer...

Answer 6

Thanks for your question, James! We do have a really solid option for your 2025 Chevy Express. The Longview Custom Towing Mirrors #LVT-1700 are a great fit and will give you a much better view down the sides when towing. These are custom-fit mirrors,…

view full answer...

Answer 7

Hey John! Since you have the same number of teeth the Replacement 24 Tooth Pinion Spur Gear for Power Gear RV Slide Outs #LC86EX will likely work as a replacement. I would measure the outer diameter as well. If it matches the 1.417" measurement…

view full answer...

Answer 8

We do not have replacement cap/covers available for the Camco Fold-Away RV Grab Handle #CAM42175. While it is a little hard to tell because I can only zoom in so close, but it looks like the tab that holds the cap on may be broken. This would explain…

view full answer...

Answer 9

The Dexter 8-427 hub is no longer available. Even looking through Dexter's site the only references to it are replacement bearings. You can use a wheel with a larger pilot hole as long as the wheel attaches to the hub using lug nuts and not…

view full answer...

Answer 10

Hi Martyn, For your 2020 Keystone Cougar 27SGS Half Ton with the 3 step MORryde step unit, the correct option you’ll want is the MORryde Safe T Rail Telescoping Handrail part #MR54BR. This model is designed to mount to the flat fiberglass exterior…

view full answer...

Answer 11

The Replacement Spring for Reese and Draw-Tite Fifth Wheel Trailer Hitches #30776 you were looking at connects from the actuating rod to the hitch head, and a second spring goes from the hitch head to the jaws. These springs hold the actuating rod…

view full answer...

Solution for RV Lend a Hand Handle that Has Broken Spring

Product Page this Question was Asked From

Continue Researching