Auto Headlamps on 2017 Ford Escape Won't Work After Curt C56320 Trailer Wiring Harness is Installed  

When installing a trailer wiring harness like part #C56320 on your 2017 Escape, the Black power wire needs to be run to the positive battery post. A lot of folks want to use a circuit near the back of the vehicle instead of running the wire all the…

I first recommend disconnecting the trailer and using a circuit tester like #PTW2993 to test the functions on the 4-way connector from the Curt T-Connector Vehicle Wiring Harness #C56320 you installed on y our 2017 Ford Escape. Test to make sure all…

I have a solution for you, but the Curt #13368 is not the hitch you're looking for since it's designed to fit on the Ford F-150. Instead you're looking for the Curt #C13186 which is a confirmed fit on the 2018 Ford Escape SE and will…

In regards to installing a trailer wiring harness like the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #C56320 on a 2018 Ford Escape, you must run the power wire directly to the battery per the instructions. This…

If your 2017 Ford Escape does not have the factory tow package, I recommend the Curt T-Connector Vehicle Wiring Harness #C56320. This custom-fit harness will install by connecting to the built-in ports located behind the driver and passenger side…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…