Fit of Timbren TFR350CC Rear Suspension Helper Spring on 2011 Ford F-350 Cab/Chassis Truck

Question

Question:

Can you send me the measurements of the Timbren TFR350CC I want to make sure they will work on my truck? I have a 2011 Ford F350 cab and chassis

asked by: Greg C

0

Expert Reply:

The Timbren # TFR350CC is a fit for a 2011 Ford F-350 Cab/Chassis Truck, as confirmed by Timbren. Measured from the bottom of the rubber Aeon spring to the top of the mounting bracket (see photo), the spring is 7-5/8 inches tall.

You can see a product video by clicking the provided link.

expert reply by: Mike L

0

Dimensions of Timbren TFR350CC Helper Spring
(click to enlarge)

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 3

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

The differences between the Firestone Ride Rite #F2613 and the Red Label #F2709 for your 2023 GMC Sierra 3500 Crew Cab Long Bed is the air pressure and max weight capacity. The Ride-Rite #F2613 are rated for 5,000lbs and 100 PSI, where the Red Label…

view full answer...

Answer 7

Hi Donald, The Timbren Rear Suspension Enhancement part #TJRJK is a fit for a 2024 Jeep Wrangler Unlimited and installs by replacing your factory bump stops above your rear axle. Timbrens are easy to install and once they're on there isn't…

view full answer...

Answer 8

Hey Kurt, yes the correct gap for SumoSprings Solo kits like the part #SS88UV is 1/2 inch to 1 inch like you mentioned. Did you install this already?

view full answer...

Fit of Timbren TFR350CC Rear Suspension Helper Spring on 2011 Ford F-350 Cab/Chassis Truck

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching