Distance From Hitch Pin Holes to Back of Shank on B&W Tow & Stow 2-Ball Mount BWTS10043B

Updated 08/10/2021 | Published 08/09/2021

Question:

What is the distance between the 2 pin holes that slide in to your vehicle hitch and the back of the vertical adjustment bar that you move you ball up and down on? I have a Towtector and need a little more room to mount the Towtector on the hitch so it does not hit my bumper. See picture for what I need. Distance between the 2 vertical red lines for A and B.

asked by: Evan G

Expert Reply:

Although your photo did not come through, I believe I was able to get the measurement you were wanting, which is the distance from the center of the hitch pin holes to the back of the closest part of the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 9" Drop, 9-1/2" Rise # BWTS10043B.

As you can see by the accompanying diagram I added, it is 3 inches from the closest pin hole, and 4-1/4 inches from the furthest pin hole.

I have added a link below to a video review for you to check out as well of the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 9" Drop, 9-1/2" Rise # BWTS10043B.

expert reply by: Kyle S