Video Transcript for Review of Trimax Locks Trailer Hitch Ball Mount - Razor Ultra Adj Aluminum 2 Ball 2 In - TMX83QR

Hi, everybody. Andy here with etrailer. Let's take a quick look at this Trimax Razor Ultra adjustable aluminum two-ball mount for your two-inch trailer hitch receiver. So this is an adjustable ball mount is gonna let you fine-tune the height of your trailer connection, so everything's gonna stay level while you're towing. And this is going to give you about eight inches of drop in this orientation, and when you flip this over, about eight inches of rise, so you're gonna be able to easily dial in that exact height that you're looking for. You're gonna be able to adjust this in one inch increments.

Of course, this is constructed of aluminum, and as you know, that's much lighter than steel, so it's gonna be a lot easier to handle when you're installing this, adjusting the height, or taking it on and off your truck. That's gonna make a big difference if you're moving it around, or if you just don't want to deal with a heavy hitch. (metal clacking) So I'm just showing you how easy this is going to be to get the height adjustment that you're looking for and also swap the ball. So I'm switching this from 2 5/16 inch to a two inch. Another benefit of this aluminum is going to be the corrosion resistance.

Aluminum doesn't rust like steel, so it's gonna hold up better over time, especially if you're in areas with a lot of rain, snow, or road salt, you're towing a boat trailer for a lot, for instance. Also, if you notice, you're gonna have the ability to stow this when you're not using it. Obviously you'll replace the pin and clip, but you're not gonna have to worry about banging up your shins when you're walking behind your truck when you don't have a trailer hooked up to it. (metal clacking) So this is gonna slide into your two-inch trailer hitch receiver, and this is going to give you a towing capacity of 12,500 pounds and a tongue weight of 1,500 pounds. So this is gonna do a great job of handling your towing needs for your two-inch trailer hitch receiver.

And just to give you some measurements to kind of give you an idea of the size here, let me line that back up there in frame, measuring from the center of the first hitch pin hole to the center of the ball, about 9 3/4 inches. Moving over to the second hitch pin hole, about 10 3/4 inches. And then from the center of the second hitch pin hole to the end of the shank, about 1 3/4 inches. So we do have other versions of this available for your, for instance, for your 2 1/2 inch trailer hitch receiver, we have different drops and rises available and also steel options. So if this isn't exactly what you're looking for, do take a look at the other options that we have from Trimax.

Well, I think it's gonna wrap up our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.