Demco Tow Bar and Base Plate Kit for Flat Towing 2019 Ford Ranger Lariat 4x4  

Question:

Expert Reply:

Yes the base plate kit part # DM9519343 that you referenced does fit the Demco Commander 2 tow bar part # DM9511012 that you also referenced. You will need a lighting solution and a braking solution as well to flat tow your 2019 Ford Ranger.

For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.

And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR and outlet kit # RM-9332, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.

I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.

expert reply by: Jameson C

0