Dimensions of Bulletproof HD256 Adjustable Hitch Ball Mount

Question

Question:

Do you have a diagram showing the measurements especially hole to hole for hitch holes to bottom/middle/top of ball?

asked by: James R

0

Expert Reply:

I sure do, the nice folks at Bulletproof Hitch provided a dimensional diagram for their # HD256 adjustable ball mount. I'll post the diagram for you so you can check it out. I've also linked to a demonstration video that you might find helpful.

expert reply by: Mike L

0

Dimensions of HD256 Bulletproof Ball Mount
(click to enlarge)

Answer 1

So there isn't a 6 inch hitch extender for a 2 inch hitch that has an 11,000 lb capacity and 1,200 lb tongue weight capacity, and hitch extenders also reduce the capacity of your hitch by 50 percent, so they are generally just used for…

view full answer...

Answer 2

In order to use the Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2-1/2" Hitches part #ERT00110 you'll need a ball mount with extended length shank. For a 2-1/2" hitch, the best option we have would be the BulletProof Hitches…

view full answer...

Answer 3

The InfiniteRule Locking Pins for BulletProof Ball Mount part #34061674-D is the best option we have for the BulletProof Hitches Adjustable 2-Ball Mount for 2-1/2" Hitch like part #HD256. The reason for this is because they will allow you to…

view full answer...

Answer 4

Hey Andrew, I checked with Trailer Valet and the distance from the hitch pin hole to the ball center on the Trailer Valet adjustable ball mount part #TV26FR is 11.5 and 13 inches depending on which pin hole you use.

view full answer...

Answer 5

Hi Chris; the reason you don't see it addressed in the video is we typically don't see trailers come in with a pintle hook/lunette ring setup. Gen-Y makes really solid, overengineered products so I expect the Phantom X #GY95XR to perform…

view full answer...

Answer 6

Hey Travis, welcome back! You're friend makes a good point the only way to lock the B&W Companion OEM 5th Wheel Hitch item #BWRVK3305 is to use a padlock like item #Master Lock 1-9/16" Wide Solid Brass Body Padlock item #ML140DLH. The…

view full answer...

Answer 7

Hello Brian, Thank you for reaching out. While we don't offer a replacement switch for our etrailer Electric Trailer Jack - A-Frame - 18" Lift - 5,000 lbs #e55ZV, there's some good news: this jack comes with a 2 year warranty. That means…

view full answer...

Answer 8

Thanks for reaching out Mike! I spoke to Weigh Safe and only their Cerakote aluminum ball mounts are made in the USA. All other steel and aluminum ball mounts, including the steel 180 PRO models, are manufactured overseas. If you wanted an American…

view full answer...

Answer 9

Hey David, the Weigh Safe Aero Hitch part #WS77MR does have the clamshell style adapter to convert the hitch ball of it to a 2-5/16 inch ball size. With that removed it's a 2 inch ball. Is that what you were wanting?

view full answer...

Dimensions of Bulletproof HD256 Adjustable Hitch Ball Mount

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching