Will the MORryde Suspension Upgrade Kit for Tandem Axle Trailers Work With Equa-Flex Equalizers

Question

Question:

I have a 2010 Fun Finder 189fbs and need to replace the Equa flex Equalizers. The dimensions dont match up perfect but are very close to # LC279687. Will this # MR76ZR fit Item # LC279687. What would you recommend? Thank You

asked by: Jarrod E

0

Expert Reply:

Yes, the MORryde Suspension Upgrade Kit for Tandem Axle Trailers part # MR76ZR will work with the Equa-Flex Cushioned Equalizers part # LC279687. I would however just retain the bushing already installed in the equalizer. The dimensions of the equalizer from the left and right bolt holes should be within about 1/4" of one another to remain compatible.

expert reply by: Conner L

0

Answer 1

Hey Robert, welcome back! The yellow blocks you're looking at on your Reflection are part of the OEM Lippert Correct Track system. You can use your MORryde X-Factor Crossmembers #MR33WR but you will need to add the MORryde X-Factor Crossmember…

view full answer...

Answer 2

Hi Robert; you could use the LaSalle Bristol Waste Valve #34466N11AA as a replacement but the handle will sit underneath the trailer right at the valve. Looking at the Grand Design parts site it looks like you have a 1-1/2" Valterra with a…

view full answer...

Answer 3

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 4

You will want to install the Equa-Flex Cushioned Equalizers #LC279687 so that the head of the bolts on the equalizers are facing away from the trailer. The equalizers used to only have the label on one side only which is why the instructions read the…

view full answer...

Answer 5

The two arms that attach to the shackle bolts of the Equa-Flex Equalizers part #LC279687 do move independently. If you check out the picture I attached you can see the bottom of the equalizer and that the two pieces are not connected. This allows the…

view full answer...

Answer 6

In order to determine which Equa-Flex system is going to be the correct replacement for you, you will just have to measure your current one and choose the system that matches. For example, the Equa-Flex Cushioned Equalizers - Double Eye Springs…

view full answer...

Answer 7

That's a great question Ron. Since the Equa-Flex Cushioned Equalizers #LC279687 arms move in rather than up like on the MORryde #MR87ZR you do not have to worry about the additional clearance required. You do still need to have enough clearance…

view full answer...

Answer 8

Hey Todd, thanks for reaching out! We definitely have the parts to get the suspension on your rig upgraded - I just need to know the dimensions between the bolt holes both on your equalizer and your shackles in order to make sure you get the correct…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Will the MORryde Suspension Upgrade Kit for Tandem Axle Trailers Work With Equa-Flex Equalizers

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching