Should There Be a Light On the Redarc Tow-Pro Liberty Brake Controller While Driving Without Trailer

Question

Question:

Hi, I recently bought a Tow-Pro Liberty from etrailer.com and have it installed on my 2016 GMC Acadia. My camper hasnt been delivered yet, so I couldnt test the Tow-Pro with a trailer. I just noticed that the LED was not lit up when I am driving my Acadia. Im not sure this is because my wiring has issues or just because no trailer is hooked up?

asked by: Bobby

0

Expert Reply:

In regards to the Redarc Tow-Pro Liberty Brake Controller part # # RED24FR, the unit should not be illuminated while driving without a trailer. If you press the button while a trailer is not attached you should see a breathing blue light and that simply indicates the controller is in sleep mode. This is further explained in the manual so please give this a look over.

expert reply by: Conner L

0

Steve D.

12/17/2024

What do you mean by "breathing" blue light?

Reply

Jesse M.

12/17/2024

@SteveD Yeah, it is hard to describe but it should be a blue light that slowly dims from on to off. Like, not blinking, more slowly pulsating from on to off. Redarc uses the term "breathing" in their literature but that is really the only place I have heard that term used, now that you mention it.

Reply

Steved

12/17/2024

@JesseM Thanks for the explanation, it does just start at bright blue and slowly dims to off if the button is pushed and no trailer is attached.

Reply

Answer 1

Hello Lewis, I can definitely get you set up with the correct towing components to get you out on the road to adventure! You’ll want to check your owner’s manual to see what Honda says you can tow, just because the hitches are rated that high doesn’t…

view full answer...

Answer 2

We can definitely get you set up. For a 7-way wiring harness for your 2024 Honda Pilot trailsport I recommend the Curt T-Connector #C35ZV which will plug in to the existing tow package connector at the rear your vehicle. I do also recommend getting…

view full answer...

Answer 3

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 4

For your 2024 Nissan Frontier I recommend the Redarc Tow-Pro Liberty Brake Controller #RED24FR. I like the Liberty because it is simple, reliable, and looks great in any vehicle. The main unit installs behind the dash, so only the control knob will…

view full answer...

Answer 5

For a trailer that weighs 3,000 lbs the Rack'em Trailer Dolly #RA20 is what I recommend. It's only capacity is 500 lbs tongue weight which would be more than what your 3,000 lb trailer would have. It also has an adjustable ball height to make…

view full answer...

Answer 6

Hi David, the Tekonsha Plug-In Wiring Adapter #3034-P is different than the #22292. Neither is verified by Tekonsha to fit your 2024 Ford Ranger, though there has been anecdotal evidence the latter can work with some '24 Ranger models equipped…

view full answer...

Answer 7

Since everything else is working on your Redarc Tow-Pro Liberty Brake Controller #RED24FR there may be a problem with the light pipe on the control knob. there is a 90 degree light pipe which is what brings the light up and out through the button. If…

view full answer...

Answer 8

The factory brake controller connector under the dash is not all that visible but it is fairly easy to locate. It is a 4-pin connector that is located underneath and left of the steering column. It will be taped to another harness near the brake…

view full answer...

Answer 9

If your 2006 Honda Ridgeline has the OEM tow package with the factory 7-Way trailer connector at the rear of your vehicle, then the Tekonsha Wiring Harness, #3070-P, will need to plug into the factory brake controller connector under the dash. It is…

view full answer...

Answer 10

The light breathing or "pulsing" on your #RED24FR is an indication that the trailer brakes have not been detected or the trailer has not been plugged in. Since it sounds like you were testing the brake controller and you weren't hooked…

view full answer...

Answer 11

Good question, and a trailer does need to be connected in order for the LEDs to be on when using the Redarc Tow-Pro Liberty Brake Controller #RED24FR. If a trailer is not connected and you press the manual override of the Liberty #RED24FR, the LED…

view full answer...

Answer 12

Most of the 7-way connectors, like the 7-Way Plastic Car End, item #PK12-707E, come apart by removing the two screws on the sides of the connector and then loosening a very small set screw at the back of the connector. Once this set screw is loosened…

view full answer...

Should There Be a Light On the Redarc Tow-Pro Liberty Brake Controller While Driving Without Trailer

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching