What Pull Down Screen for Garage Door of Toy Hauler

Question

Question:

I have a 2021 Forest River 325 PACK13 5th wheel tpy hauler with the party deck. The width of the ramp door is 96. Will the 97 3/4 screen work for my model? Below is a link for the specs. https://forestriverinc.com/ImageHandler.ashx?ImageID=22443

asked by: Dana K

0

Expert Reply:

This mounts inside the garage overlapping the doorway. You will need to measure the inside of your RV's garage width from wall to wall for which is best fit. The LaSalle Bristol CrossBreeze Adjustable Toy Hauler Screen, # 3441409775PBK is 97-3/4" wide. If you need a greater width, the LaSalle Bristol CrossBreeze Adjustable Toy Hauler Screen, # 3441409912PBK is is 99-18" wide.

expert reply by: Michael R

0

Answer 1

I contacted the manufacturer asking if they had a diagram on how to adjust the tension. Please note the attached image showing where to use an Allen wrench to turn the adjuster on the LaSalle Bristol CrossBreeze Adjustable Toy Hauler Screen,…

view full answer...

Answer 2

If it is necessary to cut the rails, I suggest you place the top piece into the side rails and measure from the top to the point that matches your desired length. Please look at image number 2 and compare to your particular camper. Can you place the…

view full answer...

Answer 3

The LaSalle Bristol CrossBreeze Adjustable Toy Hauler Screens do not use magnets to stay down. You simply need to pull the lanyard and you can actually stop it at any point of its length and it will automatically stop due to a mechanism in the…

view full answer...

Answer 4

The LaSalle Bristol CrossBreeze Adjustable Toy Hauler Screens like part #3441409912PBK are adjustable height-wise but not width-wise. Since you have a toy hauler that is more narrow than any of the LaSalle Bristol CrossBreeze Adjustable Toy Hauler…

view full answer...

Answer 5

In order to pick out the correct screen size for your toy hauler you just need to measure the width of the rear opening. For example the LaSalle Bristol CrossBreeze #3441409912PBK you were looking at has a screen width of 99-1/8 inches so it would…

view full answer...

Answer 6

I spoke with LaSalle Bristol and the side rails of the LaSalle Bristol CrossBreeze Adjustable Toy Hauler Screens like the #3441409200PBK are 2-1/2 inches wide. So you'd lose a total of 5 inches in width.

view full answer...

Answer 7

Hey Bill, based on the dimensions you mentioned the LaSalle Bristol CrossBreeze #3441409200PBK that you mentioned would fit. It does not have to mount all the way up to the rear door either.

view full answer...

Answer 8

I spoke with LaSalle Bristol, and they informed me that the Allen key needed to adjust the tension spring on the LaSalle Bristol CrossBreeze Adjustable Toy Hauler Screen #3441409200PBK is 6mm.

view full answer...

Answer 9

Since your door opening is 95-7/8 inches wide the correct fitting LaSalle Bristol CrossBreeze Toy Hauler Screen is the part #3441409200PBK which has a screen width of 92 inches. The railing around the screen would easily fill up the extra space.

view full answer...

Answer 10

I spoke with the manufacturer and they stated the rails on the LaSalle Bristol CrossBreeze Adjustable Toy Hauler Screen - 92" Wide Item #3441409200PBK would take up the extra 1.5" of space so you should be good with the 92" screen.

view full answer...

Answer 11

I can help you to determine if the LaSalle Bristol CrossBreeze Adjustable Toy Hauler Screen #3441409200PBK will fit your 2009 Forest River XLR 37X12SA, but I cannot say it will as I do not have access to all the dimensions on your XLR. This screen is…

view full answer...

Answer 12

The LaSalle Bristol CrossBreeze Adjustable Toy Hauler Screen - 92" Wide Item #3441409200PBK just requires some self tapping screws like Screw - Self-Tapping Phillips Head - 8 x 3/4" Item #1131832.

view full answer...

What Pull Down Screen for Garage Door of Toy Hauler

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching