Replacement 7K Trailer Axle With 92 Inch Hub Face and 74-1/2 Inch Spring Centers
Updated 07/09/2021 | Published 07/08/2021 >
Products Featured in This Question
Question:
Is this axle available in different dimensions? I need 92inch Hub face with 74.5inch Spring centers Thanks
asked by: Brian K
Expert Reply:
The only 7K axles we offer with straight spindles are the Dexter # 8327834 axle you'd looked at and the same axle with brake drums/hubs, part # 8327834-EB. These axles have a hub face to hub face distance of 95 inches and a spring seat center to center distance of 80 inches. These axles could be safely altered so they'd work for you.
Using this axle would only move your wheels out by 1-1/2 inches on each side which will not present a problem. The spring center distance isn't a huge deal, either. You can very easily use an angle grinder to remove the existing spring seats and have new ones tack welded in place in the proper position by using part # TRSS300.
The only other option would be to order a custom built axle from your local trailer shop, as we don't offer custom axles.
Product Page this Question was Asked From
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 7,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 7000 lbs
- Spindles Only
- 80 Inch Spring Center
- 95 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Video: What to Know About the Curt Soft Trac I Trailer Breakaway Kit with Battery Charger
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 8 on 6-1/2 Bolt Pattern - 94" Long - 7,000 lbs
- Shop: Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Shop: Trailer Wheel Bearing Kit, LM67048/25580 Bearings, 25580/25520, 10-36 Seal
- Shop: Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 94" - 7,000 lbs
- Shop: 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 26" Long
- Shop: D Washer for EZ Lube Spindles
- Shop: 2-1/2" Lubed Dust Cap and Rubber Plug - 2.45" x 1.52" x 1.18" - Qty 1
- Search Results: taillight bracket
- Search Results: trailer breakaway kit
- Search Results: gs 2125dl seal
- Search Results: roof kit
- Search Results: trailer leaf springs
- Search Results: d washer
- Search Results: spindle washer
- Video: All You Need to Know About the LED Bullet Clearance or Side Marker Trailer Light with Grommet
- Video: A Closer Look at theTecNiq Mini Clearance/Side Marker Light with Grommet
- Video: Complete Breakdown of the Mini Clearance/Side Marker Light w/ Grommet
- Q&A: Choosing Between Dexter Axle and Axle-Tech Replacement Brakes for a 2009 Palomino Pony Pop-Up
- Q&A: Who Makes The etrailer Trailer Axle e52GR?
- Q&A: Replacement Brakes for 2021 Keystone 5th Wheel With 7k Axles
- Q&A: Do You Have Brackets and Fenders for Trailer in a Bag?
- Q&A: Rear Suspension Enhancement Recommendation for 2019 Freightliner M2 with Leaf Springs
- Q&A: Can a Ball Mount Receiver Be Flipped Upside Down To Gain Additional Height For Leveling a Trailer?
- Q&A: Can a Hub with Outer Bearing 15123 and LM67048 Both Fit Same Spindle
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Double-Eye Trailer Suspension System Review
- Article: Trailer Wiring Diagrams
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub

