Replacement Wet Bolts and Bushings for Keystone Impact 5th Wheel

Published 07/14/2021

Products Featured in This Question

Step Wet Bolt for 1-3/4" Double Eye Springs

(78)

$20.43

Flint Hill Goods Lock Nut - Zinc Plated Steel - 7/16"-20 - Qty 1

(8)

$10.44

Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long

(748)

$9.66

Bronze Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long - Qty 1

(672)

$16.81

Dexter Bronze Bushings - Qty 4

(672)

$23.57

Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs

(1001)

$225.89

Question:

I have an equalizer that is 7-3/4" wide. Is there a kit for that?

asked by: Cliff J

Helpful Expert Reply:

The Step Wet Bolt for 1-3/4" Double Eye Springs # 34007-187-00 you were looking at have a usable length of 2-1/4", which it sounds like match your existing bolts and would be typical for 1-3/4" wide springs. You will need a 7/16" locknut for this bolt, which is available with the Fastenal Lock Nut - Zinc Plated Steel - 7/16"-20 - Qty 1 # 1137306. You could also use the Redline Wet Bolts # 126B2, which come with locknuts included.

For the bronze bushings I recommend using the Bronze Bushings - Qty. 4 # K71-291-00, which come in a 4 pack. These have 9/16" inner diameter so they'll be compatible with either one of the wet bolts mentioned above. They're also available in singles with the Bronze Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long - Qty 1 # D014-077-00.

expert reply by: Erik B

Cliff

7/14/2021

I have an equalizer that is 7-3/4" wide. Is there a kit for that?

Erik B.

7/14/2021

If you've got a 7-3/4" wide equalizer then you can use the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs # K71-449-00, which is a complete kit with wet bolts, 2-1/4" long (eye center to eye center) shackles and equalizer.