What Would Cause Wheel Studs of Dexter Hub 8-247 to Sheer Off
Updated 07/07/2021 | Published 07/06/2021
Products Featured in This Question
Question:
what would cause all 5 lugs to shear off od a dexter 3500 torflex axle with e z lube? #8-247
asked by: Jeff S
0
Expert Reply:
Sometimes with all the studs of a hub sheer off it's because one lug nut started to come loose which then caused others to work loose and with enough play the impact on the stud as the wheel turns eventually sheers off the stud.
The replacement wheel studs you need for hub part # 8-247-50UC3 would be part # 7-262.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Replacement Dexter 8-247 Wheel Hub
- Q&A: What is Meant by Triple Lip Seal of Dexter Grease Seal # DX49CR
- Article: Trailer Wiring Diagrams
- Q&A: Where Are Kenda Tires Manufactured?
- Q&A: Should Trailer Brakes All be Changed to Free-Backing
- Q&A: What are the Dimensions of Trailer Jack Support Plate # BD003135
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Is The Dometic Replacement Bellows DOM58FR A Genuine Dometic Part?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Lighting Requirements
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Slipper Spring Trailer Suspension System Review
- Article: Parts Required to Add Electric Over Hydraulic Drum Brakes to a Trailer
- Article: How to Change the Axle on your Boat Trailer Without Leaving your Driveway