Where Are Kenda Tires Manufactured?

Question

Question:

Are these tire made in the USA?

asked by: Steve

0

Expert Reply:

Hello Steve, thanks for reaching out. The Kenda tires are made in China like most other trailer tires. As far as the Kenda Karrier KR53 ST205/75R14 Radial Trailer Tire with 14" Black Mod Wheel # KE75EV, the wheel itself is made here in the USA, but the tire is made in China.

expert reply by: Jesse M

0

Answer 1

Great question, William! The Karrier ST225/75R15 #KE63KV is a KR35 while the Karrier ST225/75R15 #AM10303 is a KR03 according to Kenda. There is a slight variation in the tread pattern and from what Kenda says about them it looks like the KR03 is…

view full answer...

Answer 2

You can pretty easily go from a 205/75-14 to a 15 inch tire size like 205/75-15 like with the #AM32395 without clearance issues. This will give you a slightly larger wheel and tire which will have a higher weight capacity. So you might gain a slight…

view full answer...

Answer 3

The backing spacing of the Dexstar Conventional Steel Wheel part #AM20304 is 3.25" plus the lip for a total of 3.50". The wheel is 5.50" wide with a .50" offset which is what you use to determine backspacing.

view full answer...

Answer 4

Hey Timothy, yes the Timken Bearing Kit part #TMK92VR is correct USA made bearing kit for a trailer with 7k axles like your 2019 Grand Design 351M.

view full answer...

Answer 5

Hey Sebastian, for a spare wheel and tire in the size you need I would recommend the Kenda Karrier KR53 ST205/75R14 part #KE65EV. This is our best priced wheel and tire combo that comes with a radial tire like what you have now so it would be what I…

view full answer...

Answer 6

Hey Kelly! It looks like our information shows your tire size is 205/75R14. However, I would double check the tire size on the side of your existing tires to see if that matches. Are you looking for just a tire or a wheel and tire combo? Assuming you…

view full answer...

Answer 7

Wheel bolt patterns are defined by two numbers: the first being the number of lug nuts and the second being the diameter of the circle the lug nuts are arranged in. So a 5 on 4-1/2 bolt pattern is 5 lugs arranged in a circle that is 4-1/2 inches in…

view full answer...

Answer 8

Hello Lindsay, If you're looking to make your Little Buggy 12LRK fit in the garage more easily, and maybe even save a little on gas, downsizing your trailer tires is a smart move. The stock ST235/75R15 tires are fairly large, with an outer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hey Denny! We can definitely help you out with that rough ride on your trailer. A pretty standard option is an upgraded equalizer like the MORryde you looked at. The best choice is always going to be the one that matches your current equalizer…

view full answer...

Answer 11

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Where Are Kenda Tires Manufactured?

Product Page this Question was Asked From

Continue Researching