Trailer Wheel Stud that is 1/2 inch Diameter, 1-7/8 inch Long, with 9/16 inch Long Spline
Updated 06/15/2021 | Published 06/11/2021
Question:
Looking for a set of wheel studs 5 total Spline diameter 9/16 thick or slightly bigger Spline length 1/2 long 1/2” 20 thread 1 7/8” overall length Can you suggest an sku? Thank you
asked by: Chad
0
Expert Reply:
The part # RG03-060 covers all of the dimensions you need from the stud but only comes in a set of 4.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 1-7/8" (Qty 4)
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 1-7/8 Inch Long
- Redline
more information >
Continue Researching
- Q&A: Solution for Replacement Seal for 171255UC Oil Seal
- Q&A: Bearing Kit that Fits 2023 Grand Design 390rk with 8k Axles
- Q&A: Replacement Wheel Stud that is .545 Diameter and 1/2 - 20
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Do You Have a Video on How to Replace the Spring for the etrailer Square Direct Weld Jack e66FV
- Q&A: How To Measure For Replacement Overhead Springs On A Trailer Door
- Q&A: Comparing the Roadmaster Direct-Connect and Crossbar-Style Base Plate Kits
- Q&A: Is the Mopar 82216418AA Wiring Harness Required for Flat Towing 2022 Dodge Durango R/T
- Article: Trailer Maintenance Schedule
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Lighting Requirements
- Article: Most Popular Wheel Bearings
- Article: 7 Common Questions Everyone Has About Trailer Tires