Removing Lower Panel of 2019 GMC Canyon to Install Curt Spectrum Brake Controller

Question

Question:

I am trying to install the curt brake controller c51170. I see two screws at the bottom of the lower driver panel under the steering wheel, 2019 GMC. What do I do to remove the panel safely? Do you have a video showing this?

asked by: NATHANIEL P

0

Expert Reply:

Thank you so much for your purchase from etrailer of the Curt Spectrum Trailer Brake Controller # C51170.

We appreciate that, and in order to remove the front panel, you literally just have to remove the screws and work the panel out to remove it. If you go to about the 10:10 mark of the video I linked below you can see how our installer did this. The video is on a Chevy Colorado but it will be the same for your truck.

expert reply by: Kyle S

0

Answer 1

Hey Brandon, I would strongly recommend sticking with the Tekonsha RF brake controller part #TK94FR. We know this works really well and it sounds like it worked well for you too. The Curt Echo is not reliable enough for me to really ever recommend it…

view full answer...

Answer 2

The canister style tonneau covers typically all go over the tops of the truck bed rails at least slightly which ends up preventing a ladder rack from being able to install. With the Adarac Aluminum Series part #A4001225 which fits newer GMC Canyons…

view full answer...

Answer 3

There is not an adapter made for your 2019 GMC Canyon as it does not have a factory connector but instead uses wires that are already terminated in the drivers kick panel. I have linked an installation video for a Tekonsha P2 Brake Controller #90885…

view full answer...

Answer 4

The DeeZee Specialty Series ATV Toolbox #DZM206 has overall dimensions of 35" long x 12" wide x 9" tall. We recommend adding 1 inch to the height when determining fit to allow clearance for the lid. I've attached a photo to…

view full answer...

Answer 5

The DeeZee Specialty Series ATV Toolbox - 2 Cu Ft #DZM206 does come in a 3 Cubic Foot option as well #DZM207. This box is 35x12x12-1/2 inches and includes the locks and hardware needed for mounting to your ATV. I've attached a video to assist.

view full answer...

Answer 6

Yes, you will have no issues using the UWS ATV Storage Box with Handles part #UWS01051 as a seat. These toolboxes are built extremely well and are very durable so they will last a long time. I have attached a photo below.

view full answer...

Answer 7

There's more to a weight distribution system than just the weight capacities listed. The Equal-i-Zer brand systems like #EQ37120ET are considered by many to be the "gold standard" of weight distribution systems. They are a simple design…

view full answer...

Answer 8

The Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger - 35 Amp, #PD4135K, requires cutout dimensions of 10-1/4" long x 7" tall. Please compare this to your current installation for fitment. I suggest…

view full answer...

Removing Lower Panel of 2019 GMC Canyon to Install Curt Spectrum Brake Controller

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching