Replacement for UFP A60 Actuator on EZ Loader Boat Trailer

Question

Question:

I have an ezloader trailer with i believe an A 60 actuator in it. I need to replace the whole unit.

asked by: Don

0

Expert Reply:

To replace your old UFP A60 actuator I recommend using the Titan Zinc-Plated Brake Actuator w/ Electric Lockout - Disc - 2-5/16" Ball - 8,000 lbs # T4747220 which comes with an electric lockout. This actuator bolts on to 3" wide channel tongues and fits 2-5/16" hitch balls. This actuator is designed to work with disc brakes and will work on trailers with up to 8000-lbs capacities.

I've linked review videos of these for you to check out.

expert reply by: Erik B

0

Answer 1

Hey Kenneth, since you have a tandem disc setup on your trailer the correct inner member to replace what is on your UFP A-60 is the part #DX99FR. What part of yours failed?

view full answer...

Answer 2

The Kodiak Disc Brake Kit - 10" Hub/Rotor #K2HR35DS may fit your UFP DB-42 kit as a replacement. I cannot confirm without the size and dimensions of the axle and spindle. If your spindle has an inner bearing diameter of 1.378 inches and outer…

view full answer...

Answer 3

The proper replacement inner assembly member for your UFP 34043 would be indeed be the the Dexter #DX99FR which is compatible with disc brakes. The replacement has an electric lock out and has a 7500K capacity and is intended to work with a 2 inch…

view full answer...

Answer 4

We have had customers in the past mention that their 1999 Ranger Trail Boat Trailers like yours used Westbar Wrap around lights. For LED replacements you would want the Wraparound LED Tail Light for Trailers Over 80" - 7 Function - Submersible -…

view full answer...

Answer 5

Since trailer makers don't usually keep specs on the lighting parts used on their trailers the easiest way to identify replacements is to note a few things about your lights, like size, shape and color, and to use the linked page that shows you…

view full answer...

Answer 6

A replacement coupler option that is very similar to the existing coupler on your EZ Loader Trailer is the Dexter DX7.5L A-60, Drum, 2 Inch Ball Brake Actuator #DX33FR. Dexter acquired UFP, so actuator is essentially an updated version of your…

view full answer...

Answer 7

Hey Mark, welcome back! If your 2013 Ranger Bass Boat Trailer has a UFP Model A-60 Marine Surge Brake Actuator similar to item #DX89FR, you can replace it with the Inner Member for Dexter DX7.5L Actuator item #DX99FR, you were looking at. The Inner…

view full answer...

Answer 8

Hey Jerry, thanks for reaching out. I can help point you in the right direction, but the VIN doesn't do much good in this case because there isn't a universal database for trailers like there is for motor vehicles. Boat trailer manufacturers…

view full answer...

Answer 9

The Dexter DX7.5L A-60 brake actuating coupler, part #DX89FR would be a direct replacement for the Dexter 34044 Disc Brake coupler you mentioned.

view full answer...

Answer 10

The #DX39FR Replacement Inner Member for Dexter DX7.5L Actuator - Single Axle w/ Disc - 2" Ball is what you need. This is the replacement inner member for Dexter DX7.5L and Legacy UFP Brake Actuators like your UFP A-60 so it would be exactly the…

view full answer...

Answer 11

Hey James, thanks for the information! To replace the inner member of your Dexter actuator we've got a couple of options depending on which one you actually have. The Model A60/A75/XR84 you have stamped on your is three different styles of brake…

view full answer...

Answer 12

That's a really good question, and there is a difference between the 7,500 lb Dexter DX7.5L A-60 actuators for disc brakes; the differences are both in what they fit, as well as their length. - 14" Long & Top-Mounted For 3" Wide…

view full answer...