Dust Cover for Trailer Hub with 1.98 inch Diameter
Updated 06/02/2021 | Published 06/01/2021 >
Question:
I was wondering where on this planet I can buy 1.98 chrome dust caps? I have a pop up that Ive restored and cant find these for the life of me! Such a common size. I know you probably are not fond of referring somebody to another company but I am all out of thoughts. Btw, I have bought hitches and ball mounts from you just so you know??
asked by: DAN C
0
Expert Reply:
We have standard dust cover/caps that fit the 1.98 inch hub bore you mentioned with the part # RG04-020 but we don't have any that is chrome. Chrome plating probably wouldn't work well as it may eventually flake off.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Grease Cap, 1.988" OD Drive In - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 1.99 Inch O.D.
- 1.99 Inch
- 2000 lbs Axle
- 2200 lbs Axle
- 2500 lbs Axle
- 3000 lbs Axle
- 3500 lbs Axle
- TruRyde
more information >
Continue Researching
- Q&A: Will Tie Down Side-Mount Spare Tire Mount Fit 3" Tall Trailer Tongue
- Q&A: Is There Trailer Bearing Kit With Bearings L44649 & L68149
- Q&A: Horse Trailer Ramp Spring For Helping Lift Heavy Ramp
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Tool to Drive in 2.72" Hub Dust Caps
- Q&A: How to Measure a Trailer Hub or Dust Cap to Find the Right Replacement Dust Cap
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Looking for Grease Cap With OD Slightly Larger than 1.98 Inches
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: How to Mount a Truck Bed Camper
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Lighting Requirements

