How to Activate Charge Circuit of 2020 Jeep Cherokee 7-Way

Question

Question:

What is the cheapest way to adapt my 2020 Jeep Trailhawk to charge my attached Camper batteries while driving? I have recently installed a tow hitch with a 7 pin cable. Thanks

asked by: Paul Q

0

Expert Reply:

The least expensive way to activate the charge circuit of your 2020 Jeep Cherokee Trailhawk's 7-way will be to run a length of 10 gauge wire like part # 10-1-1 (sold by foot) from the positive post of the vehicle battery to the 1:00 pin of the 7-way through a breaker like part # 9510.

expert reply by: Jameson C

0

Answer 1

We do have a solution for you, though the Reese Trailer Connector Adapter #78118 will not work for you. Instead I recommend the Hopkins Endurance Quick-Install Trailer Connector Adapter #HM47200 which will plug into your truck's 4-way and allow…

view full answer...

Answer 2

For your 2022 Ford E-450 cutaway chassis the correct Tekonsha brake controller install harness is actually the part #22292. This is why what you have doesn't look like it would work with the 3035-P.

view full answer...

Answer 3

We have an easy solution to provide a stoplight circuit on your 2020 Jeep Cherokee with the Roadmaster Universal Stop Light Switch Kit #RM-751000. Some vehicles have a hard time finding the stoplight circuit but this switch solves the problem.

view full answer...

Answer 4

I can help you install a brake controller like the Tekonsha P3 on your 2015 Jeep Cherokee. For Brake Controller recommendations, I really like the #90195. This brake controller is a proportional controller, which means whatever pressure you press the…

view full answer...

Answer 5

When installing your Tekonsha Prodigy P3 Controller you will need the Tekonsha Custom Wiring Adapter #3014-P. This dual plug in adapter will plug into the brake controller and the other end will plug into the built in port beneath your vehicle's…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Doug, That's a good question because fit is really important so the cover stays snug on your trailer, and there is a specific way to measure for the etrailer covers. It's pretty simple, and what you want to do is measure the body of the…

view full answer...

How to Activate Charge Circuit of 2020 Jeep Cherokee 7-Way

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching