Determining Which 7000lb Trailer Axles Will Fit A 2005 Keystone Everest 364Q
Updated 05/28/2021 | Published 05/26/2021 >
Products Featured in This Question
Question:
Need 2 7k axles with electric brakes to fit a 2005 keystone Everest 364Q. I have the road master leaf spring set in my cart. I can measure the current axle later, but was hoping you could pull it up on your end.
asked by: Mike A
Expert Reply:
I would be happy to recommend two 7000lb axles with electric brakes for you, but unfortunately we do not have a break down of the length of axle your 2005 Keystone Everest 364Q uses. You will need to either measure your current axles hub face to hub face and spring center to spring center as shown in the included diagram, or if you can send me a picture of the axle tag I would be happy to get the information for you.
The Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 94" - 7,000 lbs # 8327864-EB you were looking at has a hub face to hub face measurement of 94" and a spring center to spring center measurement of 79" as shown in the included diagram.
As long as the hub face measurement is correct, you can remove the preinstalled spring seats and have two of the # TRSS300 welded in the correct location to match your current axle.
If you find you have a different hub face measurement just let me know.
I included videos of the products mentioned for you to take a look at.
Product Page this Question was Asked From
Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 94" - 7,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Electric Brakes
- 7000 lbs
- 8 on 6-1/2 Inch
- 79 Inch Spring Center
- 94 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Is There A Video That Shows How To Replace An Axle
- Q&A: How to Pick Out Trailer Axle with 8 Lug Bolt Pattern
- Q&A: Can Spring Seats be Removed and Welded On in Different Spots on Dexter Trailer Axle 20440I-ST-60
- Q&A: Need Replacement For UFP PG1090 Actuator On Magic Tilt Single Axle Trailer
- Q&A: Correct MORryde X-Factor Crossmember For CRE 3000
- Q&A: Can MORryde X-Factor Crossmember Adapter Kit Be Used to Get Around Spare Tire and Black Tank
- Q&A: Can MORryde X-Factor Crossmembers Be Used With Roadmaster Comfort Ride System?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Adding Electric Over Hydraulic Disc Brakes





