Replacement Grease Cap for an AL-KO 8490 With EZ Lube Spindles
Updated 05/25/2021 | Published 05/22/2021
Products Featured in This Question
Question:
I need a grease cap I do have the grease fitting witch part do I need Thank you
asked by: Ed
0
Expert Reply:
From what I could find out about your AL-KO 8490 hubs, they us a Dexter #84 spindle. This is one of the most common 3,500 pound options out there, so I can confirm the TruRyde Grease Cap, 1.99" OD EZ Lube Drive in with Plug # RG04-040 will fit without issue.
Depending on how your bearings and seals are looking, you may also consider looking at the Bearing Kit for #84 Spindle # BK2-100. This will replace both races, both bearings, and the seal.
expert reply by:
Lazer S
0
Product Page this Question was Asked From
Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- EZ Lube Grease Cap
- 1.99 Inch O.D.
- 1.99 Inch
- 2000 lbs Axle
- 2200 lbs Axle
- 2500 lbs Axle
- 3000 lbs Axle
- 3500 lbs Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Looking For Pre-Grease Hub Assembly For 2008 Bear Trailer
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Replacement Hubs and Brakes for 2022 Forest River Flagstaff MAC 425M
- Q&A: Dometic 420 Platinum Release Date
- Q&A: Recommended Bearing Kit and Replacement Brake Assemblies for a Dexter 3,500 lbs Axle
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Availability of USA Made Bearing Kit for 3,500 lb Trailer Axle
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)