Coupler Lock that Could Fit Demco EZ Latch Coupler

Question

Question:

Are these two items compatable? Demco 21k Ez latch and AMPLock Coupler Lock for 2-5/16 Ball Couplers w/o Lip

asked by: Chris

0

Expert Reply:

The Demco EZ Latch Couplers like the part # DM16680-52 have lips on them which is why the AMPLock Trailer Coupler Lock for 2-5/16" Ball Couplers w/o Lip # AMP34FR is not going to work as it's designed for couplers without a lip.

You'd want something that was designed for lips like the part # e98894 instead. This fits with lips and also with a 2-5/16 inch ball fit.

expert reply by: Jameson C

0

Answer 1

For the Demco Channel Tongue Coupler part #DM16080-95 that you have the AMPLock part #AMP34FR is the lock you would want as we have had people with this style of coupler send pictures of it working well on it. See attached picture. This is a very…

view full answer...

Answer 2

For your Aluma 6810 HBT trailer, I recommend the Erickson Horizontal E-Track - Zinc Coated Steel - 2,000 lbs - 5' Long - Qty 1 #E19148 along with the E-Track Backing Plate - Zinc Plated Steel - 6" Long x 6" Wide #e96RR. This will save…

view full answer...

Answer 3

Hey Gino, you'll want to take a couple measurements to determine what shank you'd need from a Blue Ox Swaypro to allow your trailer to be towed level. You'll want to measure from the top of your hitch opening on your vehicle down to the…

view full answer...

Answer 4

Hey James, The Hydrastar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes #HS481-8067 does work with the integrated brake controller of your 2019 Silverado as-is and does not require any additional adapter as this comes with one…

view full answer...

Answer 5

There are a couple of options for very high-quality coupler locks for the Bulldog cast head coupler, with the absolute best being from AMPLock: - AMPLock Trailer Coupler Lock for 2-5/16" Ball Couplers w/o Lip #AMP34FR This lock is a beast for a…

view full answer...

Answer 6

Hey Daniel. To convert your surge brake trailer over to electric over hydraulic system you'll need the Hydrastar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes item #HS481-8067. The Hydrastar item #HS481-8067 works with factory…

view full answer...

Answer 7

The Hydrastar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes #HS481-8067 is designed to be completely plug-and-play so the female end of the 7-way would need to connect to the 7-way cable that's already installed on the trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Hey Tom, great question! Both products provide an easy way to measure tongue weight, but they excel in different situations. The BTBRV Trailer Jack Foot Scale #BTBRV014 measures tongue weight at the trailer jack, so you don't need to position a…

view full answer...

Answer 11

To check the pins on the vehicle side 7-Way, you can use a circuit tester or the volt meter. The circuit tester will show you if a signal is coming through on the pin you are testing while the volt meter will tell you that and how much voltage is…

view full answer...

Coupler Lock that Could Fit Demco EZ Latch Coupler

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching