Wiring Furrion LED Marker Light RV Side Cameras

Updated 05/20/2021 | Published 05/19/2021

Products Featured in This Question

Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen

(731)

$548.78

LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems - Qty 2

(69)

$365.27

Question:

Need to know how to wire side camera. i have 4 wires on the camera. ground.v-camera,v-traffic and trigger signal I believe all go to power except ground but not 100 sure.. Any ideas.

asked by: Rick

Expert Reply:

Please see the attached instructions for the Furrion Vision S # FOS05TASF and the LED Marker Light RV Side Cameras # FCE48TASL along with a video showing the components being installed. The brown wire goes to running light circuit for the light to come one, the black goes to ground, and the red is your trigger wire for the camera to turn on. This allows you to decide what circuit you want to activate the camera. You can run it to the running lights so that any time you want the camera to be selectable from the monitor all you have to do is turn on the running/head lights. This is the most common choice and what I recommend. So, for your situation you'd run the brown and the red wire of the camera to the running light circuit of your trailer.

expert reply by: Michael R