Measurements Yakima Long Haul

Question

Question:

What is the distance between the hitch pin hole and the back of the rack mast? Also, how far out does the assembly at the top stick out from the mast on the vehicle side of the rack? Thanks!

asked by: Ryan

0

Expert Reply:

From the hitch pin to the mast is approximately 9" on the Yakima LongHaul, # Y02476.

expert reply by: Michael R

0

Longhaul_002
(click to enlarge)

Longhaul_001
(click to enlarge)

Longhaul_003
(click to enlarge)

Answer 1

I do have a potential option for you, but we do not carry a 4" long extension for a 2" hitch. The shortest extension we carry is the Yakima #Y69VR which is a 7-1/4" extension. From there everything we have is 8" or longer. Please…

view full answer...

Answer 2

Yes. You absolutely, positively, without any shadow of a doubt MUST use Swagman Bike Frame Adapter Bar #64005 with your Trek Marlin 6 & 7 bikes on either the Yakima LongHaul #Y02476 or Thule Range #TH9057. As for the racks themselves, I would go…

view full answer...

Answer 3

Hello Mitch, We have a bike rack that is safe for the back of a travel trailer, but the Benton Shifts&Grins Bike Rack for 4 Bikes - 2" Hitches - Wheel or Frame Mount #B82FR is only rated for the back of vehicles. The #B82FR is not rated for…

view full answer...

Answer 4

I checked with Yakima and the LongHaul RV Bike Rack part #Y02476 has a distance of 10 inches between the arms and 12-1/2 inches from outside to outside.

view full answer...

Answer 5

While the Curt 4 Bike Rack for 1-1/4" and 2" Hitches #C18030 is a great bike rack it is not compatible with travel trailers, unfortunately. Instead, I recommend checking out the: -Swagman Trailhead RV Bike Rack for 4 Bikes - 2" Hitches…

view full answer...

Answer 6

The answer is actually pretty simple, because using any type of hitch adapter, including a hitch extender, reduces the capacity of your trailer hitch by 50 percent, and that includes both the towing capacity and the tongue weight capacity. I am not…

view full answer...

Answer 7

Hey John, The Gen-Y Hitch Receiver Hitch Extender for 2" Trailer Hitches #GY89SR would reduce both the tongue weight and gross towing weight capacity of the motorhome's trailer hitch by 50% to 5k towing/500lb TW, leaving you unable to tow…

view full answer...

Answer 8

Hey Ryan, the reason you can't use the Thule ReVert Bike Rack for 4 Bikes #TH73VA with a 5th wheel is due to the increased movement and vibrations at the back of the trailer. Some racks that are designed to be used with 5th wheels are going to…

view full answer...

Answer 9

This is a great question that there isn't exactly a great answer for. Hitch extenders not only put the weight further away from the hitch which would increase the leverage on the hitch, but they also add movement to the assembly which will…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Measurements Yakima Long Haul

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching