Is It Normal For One Shackle To Point Up and The Other Point Down After Replacing Equalizers?
Updated 05/03/2021 | Published 04/29/2021 >
Question:
I am trying to figure out something on my car trailers suspension. The equalizer, the shackles on the front are not in the same orientation as the rear. From what I can tell they should be. I have installed new equalizers and bushings and bolts. When the axle is in the air the shackles are point down. This is the orientation I believe they should stay in? Thanks
asked by: Shane
Expert Reply:
The shackles on your equalizers should be pointing up when the trailer is under its weight on the ground, and will only point down like you mentioned when the trailer is in the air and the axles are off the ground.
It is pretty common for one side of the equalizer to pop up before the other side and to get the other side to pop up you will want to pull the trailer over a bump. We have found a speed bump works the best if you have one near you.
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 3-1/4" Center
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- etrailer
more information >
Continue Researching
- Search Results: moryde x factor
- Search Results: electric brake wire connectors
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Video: MORryde Standard Frame Hanger X-Factor Crossmember Installation - 2022 Grand Design Imagine Travel T
- Video: An In-Depth Look at the MORryde X-Factor Crossmember for Standard Frame Hangers
- Article: Dexter Service Bulletin #014
- Q&A: Proper Position of Equalizer and Shackles on Trailer Suspension
- Shop: Trailer Wiring
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: Fifth Wheel Hitch
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Shop: Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 6-1/8" Long - 9/16" Center Hole
- Shop: CE Smith Triangular Equalizer for 1-3/4" Double-Eye Springs - 6" Long - Galvanized
- Shop: Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 5-3/4" Long - 9/16" Center Hole
- Article: How to Raise Your Travel Trailer Height
- Search Results: 0623~05
- Q&A: How Do I Check If My Axle Is Bent
- Q&A: How to Check for a Bent Trailer Axle Spindle
- Q&A: Should Trailer Suspension Shackle Face Up and Down
- Q&A: Why Would Trailer Axle Shackles Flip Wrong Direction When Trailer is Unloaded
- Shop: Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 7' Long
- Video: Comprehensive Review: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers
- Video: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers Review
- Video: Measuring To Choose The Right Trailer Axle
- Video: A Closer Look at the Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles
- Q&A: Trailer Leaf Springs Rated Slightly Higher Than 4,400 lb Axle
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Should Shackle Straps Angle Towards the Axles or Away From Them

