Needed Slider Topper For 3 Awnings

Updated 04/29/2021 | Published 04/27/2021

Products Featured in This Question

Solera RV Slide-Out Awning - 151" Wide - Black

(1406)

$690.92

Solera RV Slide-Out Awning - 85" Wide - Black

(1409)

$444.72

Solera RV Slide-Out Awning - 79" Wide - Black

(1409)

$385.91

Solera RV Slide-Out Awning - 103" Wide - Black

(1406)

$529.63

Solera RV Slide-Out Awning - 163" Wide - Black

(1406)

$616.70

Solera RV Slide-Out Awning - 139" Wide - Black

(1406)

$647.41

Question:

Need right size slider awning on following slider widths. Color black. 1 154.5” width x 38” extension. 2 132.5” width x 24” extension. 3 76.25” width x 38” extension.

asked by: Arnold P

Expert Reply:

The standard projection on most of our slides is 48", so we need only to worry about the width. Idealy, we would measure the width of the slide out box, including the flanges, and then add 2-1/2" extra on both sides. From there pick out the closest fit.

1. 154.5” wide slider + 5" = 159.50", use 163" Solera # LCV000168110 or 157" Solera # LCV000168108
2. 132.5” wide slider + 5" = 137.50", use 139" Solera # LCV000168328
3. 76.25” wide slider + 5" = 81.25", use 85" Solera # LCV000165062, or 79" Solera # LCV000168105

The measurements above are for awning fabric. You will need clearance for the hardware that sticks several inches out. You may need to order a smaller size topper if you have obstructions.

I would also line the back of the awning rail with buytl tape to seal the screw holes. I have attached a link.