Choosing Between White Painted Wheel And Galvanized Wheel For Boat Trailer

Updated 03/05/2024 | Published 04/19/2021

Products Featured in This Question

Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C

(7533)

$70.29

Kenda 5.70-8 Bias Trailer Tire with 8" Galvanized Wheel - 4 on 4 - Load Range C

(7284)

$72.39

Question:

For a boat trailer which wheel finished is preferred? I am replacing tires/wheels on a boat trailer for a 12foot aluminum boat. Thanks!

asked by: Fred H

Helpful Expert Reply:

For a boat trailer, the best finish is going to be galvanized. The Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C # AM30120 that you were looking at may work fine, but I don't recommend it for boat trailers since the wheels will see a lot of water. The Kenda 5.70-8 Bias Trailer Tire with 8" Galvanized Wheel - 4 on 4 - Load Range C # AM30130 is going to hold up better and resist rust better than the white painted wheel. I attached a demonstration video for you to check out.

expert reply by: Andrew N

Nick

3/4/2024

Any other options in this size?

Mike L.

3/5/2024

@Nick I'm assuming you're meaning a 5.70-8 tire size mounted on a wheel with a 4-on-4 bolt pattern. If that's the case, a white powder coated or a galvanized wheel is available. In a white wheel, the following are available: • Load Range B, 715 lb capacity per tire, part # AM30080 • Load Range C, 910 lb capacity per tire, part # AM30120 For a galvanized wheel: • Load Range B, 715 lb per tire # AM30090 • Load Range C, 910 lb per tire # AM30130 We hope that helps!