Determining The Correct Weight Distribution Hitch For Towing 2016 Gulf Stream Wide Open 310KBS

Question

Question:

Looking at the Blue Ox WD sway control hitch, but need a 2.5inch shank. The trailer TW is about 1200lbs, so that would mean the BXW1503. Reading another persons question, it looks like I can bump up to the BXW2003. How would this work in my situation? Would tow experience be hampered with moving up to the BXW2003? Tow Vehicle is: 2016 GMC Sierra 2500 HD Camper is: 2016 gulf stream wide open 310KBS Thank you

asked by: Matt W

0

Expert Reply:

I would be happy to go over finding the correct weight distribution hitch for towing your 2016 Gulf Stream Wide Open 310KBS with your 2016 GMC Sierra 2500HD, but you will want to confirm the total tongue weight of your setup.

Total tongue weight is the tongue weight of your fully loaded and ready to tow trailer plus the weight of any cargo behind the rear axle of your truck. The easiest way to get an accurate tongue weight measurement is with a tongue weight scale like the # e99044 but there are other methods which are outlined in the included help article.

Now assuming that your total tongue weight is the 1200lbs you mentioned then the Blue Ox SwayPro Weight Distribution w/ Sway Control - Clamp On - Underslung - 15K GTW, 1.5K TW # BXW1503 would be correct if your trailer has an underslung coupler which is pretty uncommon so you would likely need the # BXW1500 which is the same system but designed for a standard coupler.

These systems are rated for total tongue weights ranging from 1000-1500lbs which is likely where you total tongue weight will fall, but you will need 2" hitch ball # A-90 or 2-5/16" hitch ball # 19286 to match the coupler on your trailer.

Since your Sierra has a 2-1/2" receiver you would also need Blue Ox SwayPro Weight Distribution Shank for 2-1/2" Hitches - 9" Long - 9 Hole Adjustment # BXW4028.

The Blue Ox SwayPro Weight Distribution w/ Sway Control - Clamp On - Underslung - 20K GTW, 2K TW # BXW2003 you were looking at is compatible with 1500-2000lbs of total tongue weight, but would require your trailer to have an underslung coupler.

I included videos of the products mentioned for you to take a look at.

expert reply by: Samuel C

0

Answer 1

I do have an option for you but suspension enhancements for the tow vehicle won't help much with sway. I instead recommend a weight distribution system with sway control which will take the place of suspension enhancements and if you choose the…

view full answer...

Answer 2

Hello Michael, thanks for reaching out. Regrettably, we do not offer high enough rated Reese round bars for your new camper. Also, like you said, the new Reese Dual Cam 2 is only goes up to a 1,200 lb tongue weight rating so this is not a good option…

view full answer...

Answer 3

With a frame that is 10 inches tall and 2 inches thick I suggest going with a chain style system likeBlue Ox SwayPro Weight Distribution w/ Sway Control - Clamp On - Underslung - 15K GTW, 1.5K TW #BXW1503.

view full answer...

Answer 4

The B&W Continuum Weight Distribution System part #BW78FR per B&W, does have built-in sway control. That said, all weight distribution systems have some sway control as they provide friction at the connection point which will then in turn…

view full answer...

Answer 5

Hey Doug, welcome back! Yes, we have the Andersen Ultimate Safety Chain Kit with Clevis Hooks #RM3230. This is the complete kit, Andersen doesn't have the attachments available individually. It is specifically designed for the gooseneck mount…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hey Eric, The hitch extenders that we currently offer for a 2-1/2" receiver tube opening unfortunately max out at 6,000lbs GTW and wouldn't be capable of towing the trailer. You're most likely going to need to upgrade to a TorkLift…

view full answer...

Answer 10

Hey Doug, congratulations on the new truck and trailer! That is a nice setup for sure. Unfortunately, the backup cameras aren't going to integrate with your dash cam system. Since you're already prepped for Furrion, and it is the best on the…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Determining The Correct Weight Distribution Hitch For Towing 2016 Gulf Stream Wide Open 310KBS

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching