Will a Curt Trailer Hitch # C15809 fit a 2012 Dodge Ram 2500 Mega Cab

Updated 02/28/2013 | Published 02/26/2013

Question:

Jameson, Thank you for your reply regarding my question on fitment. If I read your information correctly, this hitch does not require any holes to be drilled beyond what the factory has supplied. If this is so can you tell me if this hitch mounts from the top, side or bottom of the truck frame. Thanks again Jameson

asked by: Mark H

Helpful Expert Reply:

The Curt Trailer Hitch Receiver # C15809 that you referenced will work on your 2012 Dodge Ram 2500 Mega Cab.

Cab and chassis model trucks come from the factory without truck beds on them at all. Typically trucks are bought like this so a flat-bed or service body can be installed.

Check out the picture I attached that shows a cab and chassis truck.

expert reply by: Jameson C

click to enlarge

Mark

2/26/2013

Jameson C.

2/28/2013

You are correct, you will not need to drill any holes to install the Curt Hitch # C15809. You will have to fishwire a few bolts. I attached a video on how to do this in case you are unfamiliar with this technique. The hitch also mounts to the bottom of the frame. I attached a picture I took from the installation instructions that will show you how it installs.