Correct Dust Caps for 1.78" Hub Bore
Updated 02/17/2021 | Published 02/15/2021
Products Featured in This Question
Question:
Hi Would you have a 1 7/8 Axle dust cap OD 1 7/8 that slips into axle thanks
asked by: Andrew J
Expert Reply:
Thanks for sending in your picture and a tape measurement of a 1-7/8" dust cap, but we don't have any dust covers with an outer diameter of 1.875". We have a bearing protector that is 1.78" in outer diameter, which is the Fulton Grease Cap - 1.786" Outer Diameter # F001503.The next size up is a 1.988" dust cap # RG04-020.
It's also possible that the hubs on your 1947 International KB-1 Truck have non-standard sizes. I highly recommend picking up a digital caliper like # PTW80157 to get an extra precise measurement to make sure you're getting the best fit for your truck.
(click to enlarge)
Product Page this Question was Asked From
Fulton Grease Cap - 1.786" Outer Diameter - 1-9/16" Tall - Drive In
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 1.79 Inch O.D.
- 1.79 Inch
- 2500 lbs Axle
- 3000 lbs Axle
- Fulton
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Fulton Grease Cap - 1.943" Outer Diameter - 1-3/8" Tall - Drive In
- Shop: Dexstar Dual Wheel with Offset - 16 x 6 Rim - 8 on 6.5
- Shop: Fulton Grease Cap - 1.943" Outer Diameter - 1" Tall - Drive In
- Shop: Fulton Grease Cap - 1.786" Outer Diameter - 1-9/16" Tall - Drive In
- Search Results: dust cap
- Shop: Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Replacement Magnet Retaining Clips for 10" and 12" Electric Trailer Brakes - Qty 10
- Search Results: dust caps
- Search Results: grease caps
- Search Results: clip
- Search Results: brake
- Search Results: bk2~100
- Search Results: bk1~150
- Article: Most Popular Wheel Bearings
- Q&A: Grease Cap Recommendation for Trailer Hub with 1.938 inch Bore
- Q&A: Grease Cap Closest to 1.934 Diameter
- Q&A: Do You have Grease Caps for a 1.935 Bore Diameter Hub
- Q&A: Replacement Grease Cap Recommendation
- Video: Fulton Grease Cap Spec Review
- Article: Holiday 2025 | Best Gifts for RVing
- Q&A: Can I use a different seal than what comes with DX22XR
- Q&A: Could Dexter 2,500 lb Axle Hub DX22XR Fit on 6 inch Long Spindle
- Q&A: Replacement Lens Needed for Light with SAE-P2-A98 On Lens
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Electric Brake Controller Installation on Dodge Ram Trucks to 2012
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: The Differences Between Cam Buckles and Ratchet Straps (And Who Would Win In a Fight)