Recommended Step/Walkway for Boat Trailer Tongue

Question

Question:

Do you carry any type of trailer tongue walkway platform for boat trailers.

asked by: Jim T

1

Helpful Expert Reply:

I do have step options which can be mounted to the tongue of a boat trailer but we don't have any sort of walkway platforms that you were referring to. I recommend the HitchMate Boat Trailer Step part # HE4036 which will fit any tongue up to 3" wide x 5" tall and provides a nice 5" wide x 9" long step.

expert reply by: Conner L

1

Answer 1

The proper mounting location for side marker lights such as #MC32AB are as follows: For rear side marker lights you must have one on each side of your trailer and as far toward the rear of trailer as possible. They will need to be 15 inches or more…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 4

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 5

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 6

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 7

Hi Calvin! All of the pre-greased hubs/drums, like the Terran Industries Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 4-1/2 #TX68VJ, come with bearings made overseas and are all basically the same quality. At least that I…

view full answer...

Answer 8

The door clamp style of roof racks like the Inno part #INB137, #INSUT, and #INK685 do not allow water to leak into the vehicle. If you check out the picture I attached you can see that the clamp actually fits above the door seal.

view full answer...

Answer 9

Hey Paul, thanks for reaching out. I think the Tie Down Roller Bunks #TD87FR are a good direction for what you are trying to fix. I would not mount them on top of 2x4 bunks though, since your main problem is already that the boat sits too high. The…

view full answer...

Answer 10

Hey Kris, the Dutton Lainson winch part #DL15440 does not come with a strap so you will need to order one with it. The part #DL24250 will work great with this winch as it is correct width, is 25 feet in length, and has a capacity of 3,700 lb WLL and…

view full answer...

Answer 11

Glad to hear you are liking the wheels, Wayne! With the lug holes being a bit recessed on the Kenda #KE22XJ you got, I recommend going with the DeeMaxx Trailer Wheel XL Lug Nut - Chrome - 1/2" - Qty 1 #DE23KR. This is 1-7/8" long and fits…

view full answer...

Answer 12

Hey Terry! In order to mount the CE Smith Fenders #CE19504-2, normally I recommend #CE26098G-2 or #CES54XR (x 2) depending on your application. Do you know if you need the 90 degree bend to attach to the frame of the trailer, or the straight bracket?…

view full answer...

Recommended Step/Walkway for Boat Trailer Tongue

Product Page this Question was Asked From

Continue Researching