Determining If 9 Fulton Winch Handle Will Fit On Fulton 143001 Winch

Question

Question:

Hi, I have a Fulton 143001 winch which came with an 11 handle. This handle is too long for my application. I would like to know if there is a shorter handle I could purchase, eg 8-10, I would prefer 9. Thanks

asked by: John

0

Expert Reply:

There is a 9" Fulton handle # F501109 which should work on your Fulton 143001 winch as the handles are pretty universal, but measuring the hole in your current handle will confirm the fit.

The Fulton # F501109 has 3/8" x 1/2" oval mounting hole, so as long as that matches the mounting hole on your current handle this will be a direct replacement.

expert reply by: Samuel C

0

Answer 1

It can definitely be a very confusing subject when trying to determine the correct size winch and strap for your boat. The important thing to remember is that you are not lifting the entire weight of the boat but rather pulling it across the bunk…

view full answer...

Answer 2

For a wooden bunk trailer the rule of thumb is to go with a winch that has a rating that is at least 50 percent of the weight of the boat. Let's say your boat weighs a total of 2,500 lbs when totally loaded up and counting the weight of the…

view full answer...

Answer 3

I attached links to this page that have all of the dimensions for the Fulton F2 Trailer Winch #FW32000101 that you referenced. When looking at it from the front the winch will have an overall width of 14.77", which includes the extension from…

view full answer...

Answer 4

Winches like the Dutton-Lainson #DL14830 you asked about have mounting holes that tend to resemble a Picasso painting so they can be hard to describe. Instead I made a diagram that shows the majority of the bolt hole spacing. If you need a specific…

view full answer...

Answer 5

Thank you for that info, and while we have some options for you to replace your Shelby 5764A trailer jack, there isn't one that is going to fit that bolt pattern. So you have a couple of things you can do, which is either have a new plate welded…

view full answer...

Answer 6

We offer weld-on and bolt-on trailer jacks that are similar to the Shelby 5764A jack you wish to replace but the jacks we offer are not exact replacements. We do have a jack that has a mounting plate similar to the Shelby mounting plate., It is part…

view full answer...

Answer 7

I do have an option for you but Shelby boat trailer jacks are discontinued and we don't offer any direct bolt-on replacements for them. That said, you can easily remove the old flange by cutting or simply place the new jack beside it and leave…

view full answer...

Answer 8

I recommend using the Xtreme Off-Road Swing-Up Trailer Jack #ORJW350D as we do not have a jack which will fit the same weld on bracket you have on your boat trailer. This jack can be bolted onto your frame and will allow you to have more…

view full answer...

Answer 9

We do have trailer coupler locks you can use, but if your coupler doesn't have a pin hole, there isn't a way to lock it while it's attached to your vehicle's hitch ball; it will need to be uncoupled for a lock to be put on. Once you…

view full answer...

Answer 10

Hello Roger. The Dutton-Lainson Hand Winch #DL14725 is a good option for replacing your Dutton-Lainson 1100A boat winch. The mounting plate dimensions will be a little bit different than the 1100A model though, so you may need to move your mounting…

view full answer...

Answer 11

The Dutton-Lainson Hand Winch part #DL15303 is the replacement that I recommend for your Shelby Hand Winch 5405. These winches both have the same 1,400 lb capacity and overall size. In regards to mounting, most hand winches now use a standard pattern…

view full answer...

Answer 12

I will be happy to show you the mounting hole dimensions for hand winch #DL14725. I have included a picture that shows them for you. This winch can be used with either a strap, #DL24249, or a cable #DL24104. Straps are much better for marine…

view full answer...

Determining If 9 Fulton Winch Handle Will Fit On Fulton 143001 Winch

Continue Researching