Troubleshooting Furrion Vision S Wireless Camera Not Pairing After 1 Year Of Use

Updated 12/29/2020 | Published 12/24/2020

Products Featured in This Question

Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen

(737)

$464.20

7-Way Trailer Adapter for Towing Trailers with LED Lights

(201)

$35.62

Question:

I have blue led lights on the monitor and camera. Monitor says no signal. This has worked in the past but now isn’t. Can’t get it to pair. Have been using the instructions still no luck. If it helps, it has worked fine for the last year. It was installed and brand new from the dealer

asked by: Todd

Expert Reply:

I am sorry to hear you are having a problem pairing your Furrion Vision S Wireless RV Backup Camera System # FOS43TASF.

I reached out to Furrion and my contact mentioned that since you have power to the monitor and camera and have already tried the troubleshooting steps in the instruction manual to remove the camera from the RV and bring it into the cab for the pairing process. She mentioned you can plug the camera into the monitor to do this.

She was also curious if you have changed tow vehicles, as they have found that some 2019 and 2020 vehicles do not provide enough power to the turn signals and running light circuits to power the camera. If this is the case you will need a 7-way adapter like the Curt 7-Way Trailer Adapter # C57003 which has built in resistors to remedy the issue.

expert reply by: Samuel C