What is the Thread Pitch on the Curt Sway Control Hitch Ball Part # C40093
Updated 12/28/2020 | Published 12/22/2020
Question:
what thread is the shank?
asked by: Dean C
0
Expert Reply:
The Curt Sway Control Hitch Ball, part # C40093 is 5/8-11 course. This was verified by Curt.
expert reply by:
Randy B
0
Product Page this Question was Asked From
Continue Researching
- Q&A: Trailer Hub/Drum that Fits Lippert 4,000 lb Axle
- Q&A: Replacement 126003 Hub for a Lippert 3,500 lbs Axle
- Q&A: Looking for 2-1/2 inch Hitch Shank that Can Do 10 inches of Drop
- Q&A: Replacement Hub and Drum Kit for a Lippert 3,500 lb Axle
- Q&A: How to Add Trailer Brake Controller to a Second Trailer When Double Towing Behind a Fifth Wheel
- Q&A: Bearing Kit that Fits Lippert 4,000 lb Trailer Axle of Gulf Stream CSK19
- Q&A: What is Smallest Diameter Hitch Ball Available
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Using a Portable Generator on RV
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Trailer Wiring Diagrams
- Article: Testing Breakaway Systems
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide