Dimensions of the Rattle Stop License Plate Frame Locking Bolts CR81400

Question

Question:

How long are they and what diameter?

asked by: Ron

0

Expert Reply:

To get the dimensions you asked for, I went out to the warehouse and got this item and measured with a dial caliper. The bolt in the Rattle Stop Locking Fasteners for License Plate Frames, # CR81400, is .533 inches overall length and the thread length is .380 inches.

The threaded insert is .412 inches overall height. the threaded portion that sticks up is .259 inches tall and the washer end that has a rubberized cover on it is .145 inches thick.

When threaded together with a minimal number of threads engaged, the distance between the washer end of the threaded insert and the bottom of the bolt head is .560 inches.

The 4 washers that are included measure .652 inches overall diameter and .267 inches inner diameter and .118 inches thick.

I put together a photo showing these dimensions for you. If you want to convert these dimensions to fractions, I provided a table for you to use also.

expert reply by: Robert G

0

click to enlarge

Answer 1

The License Plate Bracket #CR79050 that you referenced does sound like it will work for your application. This bracket was designed specifically for when a license plate doesn't fit the plate holder like what you are experiencing. I have attached…

view full answer...

Answer 2

Yes, the Tuf Combo License Plate Frame and Clear Shield #CR62051 will work well on your 2017 Ram 2500 SLT. For the hardware with grommets you can use the Anti-Rattle Fastener Kit #CR81400. I have attached a short video review on the license plate…

view full answer...

Answer 3

A simple solution to this would be to use some washers between the screw heads and the bracket. This will shorten them up to the desired length. Otherwise shorter screws withe the proper thread type would work too. Washers and screws should both be…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

I wasn't able to locate any instructions for the VW 5NN055203A wiring harness you purchased. I'd recommend taking the simpler and considerably more inexpensive route by using an aftermarket wiring harness like #C56403 which plugs inline at…

view full answer...

Dimensions of the Rattle Stop License Plate Frame Locking Bolts CR81400

Continue Researching