Upgrading Axles On Equipment Trailer To Standard Spindles To Replace Dexter 8-222 Drums
Updated 11/24/2020 | Published 11/22/2020
Products Featured in This Question
Question:
Hi, I just bought a Hudson equipment trailer 1994 model 16ft. I’m looking to get items for the axles, such as tires, brake shoes drums, rims etc. The numbers on the brake drum is 8-222 , does that mean anything. The tires are 7x14.5. Thanks
asked by: David
Expert Reply:
I have an option but the Dexter 8-222 drums you have on your trailer are primarily used on mobile homes and the only parts we have available for them are the inner bearing # L68149, outer bearing # LM67048, and grease seal # 10-40.
My recommendation is to replace the axles which will give you standard spindles and make finding replacement parts now and in the future easier.
To know which axle, you will need you will need to measure your current axle's hub face to hub face and spring seat to spring seat. Once you have that measurement and your current axle's weight capacity, I would be happy to make a recommendation on a replacement. I included a picture of how to measure your axle.
For the tires and wheels, I recommend the Provider ST205/75R15 Radial Trailer Tire with 15" Vesper White Spoke Wheel - 6 on 5-1/2 - Load Range D # TA23MR since we do not have a 7-14.5 option. The # TA23MR has a maximum load capacity of 2150lbs at 65 PSI and uses a 6 on 5 1/2 bolt spacing. You will need to measure your bolt spacing on your current wheels using the help article I attached to ensure you have the same bolt pattern.
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.25 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Breaking Down the Grease Seal
- Shop: Grease Seal
- Q&A: Looking for Grease Seal with 1.87 ID and 2.5 Inch OD for MHU Axle
- Q&A: Is a 10-40 and 10-19 Grease Seal Interchangeable
- Q&A: Should Utility Trailer use Mobile Home Axles
- Article: Most Popular Wheel Bearings
- Q&A: Do I Have to Use Timken Races with Timken Bearings, or can I Use Mine that were Made in China?
- Q&A: Replacement Bearings For A 6,000 Pound Dexter Axle
- Article: Trailer Wiring Diagrams
- Q&A: Comparing Chinese Bearings with Bearings Made in the USA
- Q&A: Best Way To Carry One (Or Two) Kayaks On A 2024 Subaru Outback
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide