Replacement Seal for Trailer Hub with Bearings L68149 and L44649
Updated 11/19/2020 | Published 11/18/2020
Question:
2007 Trails West - Adventure - Bumper Pull BP - 2 horse trailer The double lip bearing seal with a broken/bent spring removed had the following nomenclature on the seal. A 9501 TB 1.720 ID 2.561 OD 0.500 width Trying to find replacement seal with those dimensions? The wheel bearings were L68149 and L44649 Thanks in advance
asked by: Bob L
0
Expert Reply:
For your seal dimensions that you listed the replacement seal part # RG06-050 that you mentioned.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.72 Inch I.D.
- 2.57 Inch O.D.
- etrailer
more information >
Continue Researching
- Q&A: Replacement for Dexter Grease Seal 010-019-00
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Replacement Grease Seals For TRP GS-1719DL
- Q&A: Recommended Grease Seals For Dexter 9919860 3,500lb Axles
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: What is the Difference Between the Dexter 010-036-00 and the Timken TMK98ZR Grease Seals?
- Q&A: Replacement Bearings and Seals for Lippert 4,400 Lb Axle
- Q&A: Replacement Seal Recommendation for Dexter 010-004-00
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: How to Accurately Measure Trailer Leaf Springs