Can Voyager Observation Monitor # AOM7694 be Replaced with # VOM719WP

Question

Question:

I have a AOM 7694 Need replacement VOM 719WP compatible quad screen plug and go

asked by: Homer

0

Expert Reply:

Yes the Voyager monitor part # VOM719WP will work great as a replacement monitor for what you have now.

expert reply by: Jameson C

0

Answer 1

Hey Ronnie, the Voyager Monitor #VOM719WP will replace your AOM-7694 monitor per Voyager, but you will have to splice the existing wires from your AOM-7694 to the new Voyager Monitor. There is no direct plug and play replacement monitor.

view full answer...

Answer 2

The Voyager monitor part #VOM719WP will work great as a replacement monitor for what you have now with the AOM-7694.

view full answer...

Answer 3

Hi Jack; thanks for the question and we do have a replacement monitor for your Voyager AOM-7694. What you can use is the following: - Voyager RV Backup Camera Monitor - 7" Screen #VOM719WP

view full answer...

Answer 4

So long as you are okay with splicing, then Voyager has told us that you can replace your AOM7694 with the Voyager RV Backup Camera Monitor - 7" Screen - 4 Video Inputs #VOM719WP. The wires on the #VOM719WP are labeled, so I recommend making a…

view full answer...

Answer 5

It definitely sounds like you have a thermostat issue on your Atwood gas/electric 10 gallon water heater. I can't really vouch for the Camco RV Water Heater Thermostat #CAM08143 being compatible with your water heater but I can say that we have…

view full answer...

Answer 6

The Voyager monitor part #VO34FR is a direct replacement for the VOM-711/AOM-711 that you have now so it would be a great option.

view full answer...

Answer 7

You will need the Voyager CRT to LCD Monitor Cable Adapter #31100041 when you switch to the Voyager RV Backup Camera Monitor #VOM719WP. This will allow your current tilt camera to show up on the new monitor.

view full answer...

Answer 8

I do have an option for you but you'll only be able to use Voyager cameras with the Voyager AOM-7694 Monitor. I recommend the Voyager Rear Camera with LED Low Light Assist part #VCMS17B which I have confirmed with Voyager to be a direct…

view full answer...

Answer 9

Hey Raymond, I wish there was a direct plug in adapter solution for what you have but Voyager has told us that you'll have to cut and splice the wires to replace what you have now with the part #VOM719WP.

view full answer...

Answer 10

The correct replacement camera for your Voyager AOM-7694 is the Voyager Rear Camera with LED Low Light Assist #VCMS17B with the adapter #VGR54FR. This is a confirmed direct plug in replacement by Voyager, however, you will lose the motorized tilt…

view full answer...

Answer 11

The Voyager RV Backup Camera Monitor #VOM719WP is going to have the same camera plugs as your AOM7964. All the wire colors are going to remain the same for the power, ground and trigger wires. So when you change the wiring you will simply replace the…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Can Voyager Observation Monitor # AOM7694 be Replaced with # VOM719WP

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching