Are There Different Replacement Mounts for Regal Style Solera Side Awning

Question

Question:

Replacement Mount. is there a different part for the left or right sides? Or are they the same

asked by: Jerry B

1

Helpful Expert Reply:

There are different replacement mounts for the different sides of your regal style Solera side awning.

For the left side - the idler head - you will need the Replacement Mount for Solera Awnings - Idler Head - Regal Style # LC24VR.

For the right side - the drive head - you will need the Replacement Mount for Solera Awnings - Drive Head - Regal Style # LC48FR.

expert reply by: Kyle S

1

Answer 1

Hi Jesus, The number you provided comes back as a Solera Edge awning in black, but we'll need a bit more information to determine the correct arm because there's 3 different models in black. There should be another sticker on the arm with a…

view full answer...

Answer 2

In order to remove the old retaining pin from the drive pin on your Solera awning you will first need to remove the cover. The Drive Head Retaining Clip #LC266137 slides into the groove on the Drive Head Pin for Solera Power RV Awnings #LC266141. You…

view full answer...

Answer 3

In order to determine the correct replacement for your Lippert Edge awning you'll need to measure the length of your wall mount (see attached photo). Once you've got that number you can look for a replacement based off of that measurement.…

view full answer...

Answer 4

Since your Solera awning didn't come with the roller tube pre-built to accommodate a light strip, the best thing for your application is to go with the Vista Light LED Kit #LC25VR. This installs where the awning attaches and will actually work…

view full answer...

Answer 5

I contacted the manufacturer with your pictures and what you are needing. They provided the following part as the correct lights that you need: - Replacement LED Light Strip for Solera RV Awning LED #LC423331

view full answer...

Answer 6

Hey Thomas, just the ring disc of the #LC330961 is not available. You'd need to order the part #LC330961 and get the entire assembly.

view full answer...

Answer 7

We actually do carry the Replacement Slip Ring Assembly #LC330961 that I believe you are talking about. If you are just wanting to replace the entire idler head then you can do so with part #LC334785 which is in the color black.

view full answer...

Answer 8

Good question, and the difference between the standard Solera 12V Power RV Awning Conversion Kit #LC434724 (White) or #LC434723 (Black) and the Solera Smart Arm 12V Power RV Awning Conversion Kit #LC759405 (White) or #LC759517 (Black) is the…

view full answer...

Answer 9

Hello Gary. The Replacement Idler Head Mount for Solera Power RV Awnings #LC24VR does not include any additional hardware, so no bearings or bushings. It comes with just the mount piece for the Regal style awnings as shown.

view full answer...

Answer 10

You would not be able to use just the Slip Ring #LC330961 to retrofit your current idler head to LEDs, you would need to use the Solera Power Awning Idler Head w/ LED Upgrade - Black #LC334785.

view full answer...

Answer 11

I have a solution for you, but if you were wanting to add LED lights to your roller, it's unfortunately not going to be as simple as just adding the slip disc #LC330961. The most cost-effective option is just using something like the LED Light…

view full answer...

Answer 12

For an LED strip on the roller you could add something like the Optronics Flexible LED Light Strip - Weatherproof - White - 17' Long #UCL90CB. However, you will need to figure out how to run power to the strip and account for the…

view full answer...

Are There Different Replacement Mounts for Regal Style Solera Side Awning

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching