Recommended Trailer Brake and Drum Assemblies for UFP Replacements
Updated 10/14/2020 | Published 10/12/2020 >
Products Featured in This Question
Question:
I have 10” x 2 1/2” drum brakes on my boat trailer. I recently lost a bearing which chewed up the inside of my hub where the seal seats. I am going to do both sides of one axle of a tandem axle trailer. The axle is not an ez lube type. The number I find on the hub is 10040. I just want to get the right brake and hub assembly. It’s on a 14” wheel.
asked by: Dave R
Expert Reply:
For your brake assemblies I recommend the Demco Hydraulic Brake Kit - Free Backing - Galvanized - 10" - Left/Right Hand Assemblies - 3.5K # 40716-15. These assemblies are galvanized to resist corrosion and will not require a reverse lockout for backing your boat trailer. You will also want the Mounting Bolts and Hardware for 10" Brake Assemblies # BRKH10A and the Brake Adjustment Spoon for Drum Brakes # W80630.
For the hubs I recommend the Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized # AKHD-545-35-G-K. These come with a standard grease cap, but on a boat trailer if you want to have an easy to maintain option, I recommend using the etrailer Bearing Protectors w/ Covers for 1.98" Hub Bore - Chrome - Qty 2 # e99005.
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media





Continue Researching
- Q&A: Should Trailer Brakes All be Changed to Free-Backing
- Shop: SwingKing Bolt-On Swing Tongue Kit - 3x4 - Galvanized
- Q&A: Replacement Trailer Actuator for UFP A-70
- Search Results: hydraulic brake line kit
- Shop: Dexter DX7.5L A-60 Brake Actuator with Fill Cap - Bolt On - Drum - 2" Ball - Zinc - 7,500 lbs
- Q&A: Replacement Solution for Fulton Swing Away A60 Drum Brake Actuator
- Q&A: Recommended Replacement For A UFP Model A-70 Brake Actuator
- Video: Review of Swing King Folding Trailer Tongue - Coupler Hinge Kit - TD53FR
- Shop: LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger
- Q&A: Replacement for Dexter A-60 Brake Actuator
- Shop: Kodiak Hydraulic Brake Line Kit - Single Axle - 18'
- Shop: Dexter DX7.5L A-60XL Surge Brake Actuator - Drum - 2" Ball - Zinc - 7.5K
- Video: Let’s Check Out the Mounting Bolts and Hardware for 10" Brake Assemblies
- Video: Replacement Inner Member for Dexter DX7.5L Brake Actuator: The Breakdown
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - Free Backing - 10" - Left/Right Hand - 3,500 lbs
- Shop: Replacement Inner Member for Dexter DX7.5L Brake Actuator - Drum - 2" Ball - 7,500 lbs
- Video: The Low-Down on the Mounting Bolts and Hardware for 10" Brake Assemblies
- Video: Feature Review LED Trailer Tail Light
- Video: A Closer Look at the LED Combination Tail Light Kit for Trailers under 80" Wide
- Q&A: Recommended Hydraulic Brake Line Kit for Tandem Axle Trailer that Only Has Brakes on One Axle
- Q&A: Is There a Demco Brake Line Extension or a Longer Brake Line Kit Than the DM5426 Kit
- Video: Dexter DX7.5L A-60 Brake Actuator Review
- Search Results: wiring
- Search Results: electric brake wiring
- Search Results: trailer wiring
- Search Results: 3500 hub
- Search Results: tandem hanger kit


