Trailer Brakes Lock Up With Curt Echo Blue Light

Updated 09/29/2020 | Published 09/25/2020

Products Featured in This Question

Curt Echo Wireless Brake Controller - 7-Way Plug-in w/ Bluetooth App - Up to 2 Axles - Proportional

(1769)

$279.95

10 Gauge Wire - Blue Primary - Per Foot

(104)

$1.84

Dielectric Grease for Electrical Connectors, 2 oz.

(1481)

$10.96

Question:

Trailer brakes are locked. We unplugged the controller, plugged in, solid blue light.

asked by: Mark A

Expert Reply:

Thank you of your purchase from etrailer of the Curt Echo Brake Controller # C51180, and we can try to figure out what's happening here. The blue light on means there is not a trailer connected, and if this is happening and the brakes are locking up, there are a couple probable issues.

The first is to check for any type of corrosion on the connectors; it can hamper the signals getting through and cause a "no trailer connected" problem so look for that. If that's not the issue it could be a short in the wiring, so you will need to check the wiring on your trailer and see if there is a broken, crimped, or otherwise damaged wire that is causing the short, which you can repair with 10 gauge wire # 10-1-1.

Finally, you'll want to visually inspect the brake magnets; if you can see the copper windings coming through the magnets will need to be replaced. To test the magnets use a multimeter and follow the help article I have linked to guide you on testing magnets, as bad magnets can also cause the issue.

expert reply by: Kyle S