Is Furrion Vision S Camera System Compatible With RV That is Not Pre-Wired for a Rear Camera

Updated 09/25/2020 | Published 09/23/2020

Products Featured in This Question

Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen

(736)

$453.94

Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen

(736)

$467.77

Question:

I own a 2014 Landmark fifth wheel RV. It is approximately 40 feet long and is not pre-wired for the rear camera. Can I install the camera system on my RV and, if so, do I wire the rear camera into the running lights for power?

asked by: MORRIS E

Expert Reply:

Thanks for the photo of your 2014 Landmark, and the answer to your question is yes, you can absolutely use the Furrion Vision S Wireless RV Camera System, with your choice of screen size:

- 4.3" Screen: Furrion Vision S Wireless RV Backup Camera System # FOS43TASF

- 5" Screen: Furrion Vision S Wireless RV Backup Camera System # FOS05TASF

You do not need to have your trailer pre-wired for use, it simply needs to be wired in; the pre-wired trailers simply already have that wiring present. The rear camera will need a 12-volt power source, as you can see from the cut out of the linked installation instructions and can be wired to your reverse lights for use as a backup camera or running lights as an observation camera.

expert reply by: Kyle S