Is the Optronics # STL572RB Sealed LED Stop/Turn/Tail Light Sold as a Single Unit or Pair
Updated 11/14/2012 | Published 11/12/2012
Products Featured in This Question
Question:
Is the price for each light or for a pair of lights?
asked by: Dave
Expert Reply:
The Optronics # STL572RB Sealed LED Stop/Turn/Tail Light is sold as a single piece, not a pair.
For complete installation you will require the corresponding rubber grommet, part # a70gb, which provides protection from mechanical stress, and the mounting bracket, part # BK70BB. Please note that in an existing 2 inch by 6-11/16 inch opening the grommet can be used to mount the light; if not the bracket can be used.
You will also need the 3-wire pigtail lead in either the straight or right-angle configuration, either part # A45PB or A47PB.
Product Page this Question was Asked From
Optronics HyperX LED Trailer Light - Brake, Tail, Turn - Submersible - Oval - Red
- Trailer Lights
- Tail Lights
- Brake/Tail/Turn
- Oval
- Recessed Mount
- Submersible Lights
- LED Light
- 6-1/2L x 2W Inch
- Red
- Optronics
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Will Adarac Pro Series Ladder Rack Work With TruXedo Hard Roll Up Tonneau Cover?
- Q&A: How Much Do the Caliber Edge Glide XL Transition Plates Weigh?
- Q&A: Does Optronics HyperX LED Trailer Tail Light STL572RB Come as Single or Pair
- Article: Trailer Lighting Requirements
- Article: Trailer Wiring Diagrams
- Q&A: Getting Side Marker Lights to Function as Turn Signals and Running Lights
- Q&A: Upgrading 20.5x8-10 Tires on Pontoon Boat Trailer to Higher Load Capacity Tires
- Q&A: Do The Optronics # STL72RB And # STL82RCB Use The Same Bulb And What Is The Wattage?
- Q&A: Brake Controller Recommendation for a Truck with Air Brakes and a Trailer with Electric Brakes
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: Hitch Mounted Cargo Carrier Information
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)