Valve Stem Size For A 16 Wheel

Question

Question:

What is the valve stem size on this HD wheel? 7/16 .435 or 5/8 .625

asked by: Joe B

0

Expert Reply:

For any 16" wheel it takes a 5/8 .625 valve stem. I recommend Americana Metal, Bolt-In Valve Stem - 1-1/4" Long Item # AM20906

expert reply by: Shane H

0

Answer 1

You could use the Americana #AM20906 on your wheels, but your TPMS system is not designed for metal valve stems unfortunately; those sensors can only be used with the brass/rubber stems. If you wanted to switch to metal valve stems you would need the…

view full answer...

Answer 2

The Aluminum Liger Trailer Wheel part #LH35FR will have a 0.453" valve stem hole. Generally speaking, wheels under 16" will be 0.453" and wheels over 16" will be 0.625".

view full answer...

Answer 3

The valve stem you'd want for a 16 inch trailer wheel is the part #AM20906. Most 16 inch trailer wheels have a .625 inch hole for the valve stem to fit which this valve stem works with but also this valve stem can be used with .453 inch valve…

view full answer...

Answer 4

The metal valve stem part #AM20906 would work great with the Aluminum Sendel Series T02 Machined Trailer Wheel #AM22653. It fits the standard trailer valve stem hole sizes and has a higher psi rating than needed as well.

view full answer...

Answer 5

I do have a couple different options for you, but there is no adapter for what you are needing to do. The best option would be to use an extension cord like the Mighty Cord RV Extension Cord #A10-5025EH. Since you already have 2 power cords you could…

view full answer...

Answer 6

You could go to a slightly larger tire, 235/85-16, and get a higher ply rating which will mean the tire will be stronger. I recommend #TTWPRG235R16 which is a Load Range G rated for 4,400 pounds at 110 psi. It has a ply rating of 14 and an M speed…

view full answer...

Answer 7

You can potentially change wheel/tire size if you have the clearance but you can gain load capacity more easily by keeping your existing rims and switching to a Load Range G tire in your current size ST235/80-16. Westlake Load Range G radial tires…

view full answer...

Answer 8

A cold psi of 120 is absolutely no problem for the Aluminum Viking Series Valhalla Trailer Wheel - 16" x 6-1/2" - 8 on 6-1/2 #AX02665865HDBMMFL. Reason why is the valve stem that comes with this wheel is part #AM20906 which is rated for 200…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Valve Stem Size For A 16 Wheel

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching