What is the JR Products Thumb Operated Lock Made of

Question

Question:

Do these come in stainless steel.

asked by: Dave

0

Expert Reply:

At this time we do not offer a thumb lock like the # 37200115 that is made of completely stainless steel, but this is zinc plated to help fight off potential exposure to the elements.

expert reply by: Erik B

0

Answer 1

The length of the threaded portion of the cylinder is 1/2". However, when you put the rubber washer on the cylinder and the back nut on as little as possible, the remaining clearance is 1/4". I have attached two pictures showing this.

view full answer...

Answer 2

Hey Tyler, you’ve got a couple ways to approach that depending on how often you’re off-grid. If most of your time is still campgrounds, the AR3 Essential #GB39FR will cover your day-to-day really well. Then for occasional off-grid trips, some folks…

view full answer...

Answer 3

Thanks for the information Bob! Flat towing a leased 2025 Ford Bronco Badlands without making any modifications is going to be creative when it comes to powering your lights and a braking system but we do have all the parts you'll need. I've…

view full answer...

Answer 4

Hi Steve! There are two options that will help the sag you are getting in your 2021 Honda Pilot when you are towing. The first is the Coil SumoSprings Custom Helper Springs for Coil Spring Suspension #CSS-1125F. We have these listed as being for the…

view full answer...

Answer 5

Hey Oscar, yes we have the Coil SumoSprings part #CSS-1125F which is a confirmed fit for the rear suspension of your 2022 Honda Pilot. This installs between the coils and gives the vehicle additional suspension support. Are you towing a trailer with…

view full answer...

Answer 6

Yes, the Correct Track Trailer Alignment and Lift Kit #RR23QX will fit with the Road Armor Shock Absorbing Equalizer Kit #LC696740 on your 2021 Keystone Laredo 255SRL 5th wheel. The Lippert AP Kit #LC52SV contains the wet bolts used on the Road Armor…

view full answer...

Answer 7

Hello Terry, thanks for reaching out. The Correct Track Trailer Alignment and Lift Kit #RR23QX is designed to work with standard 3" wide x 3-3/4" tall or 3" wide x 5" tall rectangular hangers. Sadly, this will not work with the…

view full answer...

Answer 8

The Correct Track Trailer Alignment and Lift Kit - Tandem Axle #RR23QX does come with all of the components needed to lift a tandem axle trailer. The center hangers of a tandem axle setup use different components than the front and rear hangers since…

view full answer...

What is the JR Products Thumb Operated Lock Made of

Product Page this Question was Asked From

Continue Researching