Do the Truck Hero TS Rais Work with the Gator EFX Covers

Question

Question:

Will this track system fit the Gator EFX tri-fold hard cover? It is on a 2020 GMC Sierra 1500. I am looking for a track system like this that doesnt require drilling.

asked by: Tyler W

0

Expert Reply:

Yes the TS Rails for Truck Hero Elevate Rack System part # TH65FR will work out well with your Gator EFX Tonneau Cover. The design of the Gator EFX is very similar to that of the BAKFlip MX4 Hard Tonneau Cover part # BAK448133 which is confirmed to fit with the TS Rails.

expert reply by: Randy B

0

Answer 1

The correct replacement rails to convert your RetraxPro MX like the #RTX85ZR or #RTX72FR into the XR will depend on your bed length. For your 2021 Ford F-150 you will need one of the following: -5-1/2' Bed: #RTT-82381 -6-1/2'Bed: #RTX49FR

view full answer...

Answer 2

It looks like you are referring to the Adarac Aluminum Series Custom Truck Bed Ladder Rack - Aluminum - 500 lbs #A76FR which is confirmed to fit your 2019 Ram 1500 with 6-1/2' bed. This ladder rack is designed to work in combination with…

view full answer...

Answer 3

Hello Joe, Thanks for writing in! Based on the measurements you provided, the Gen-Y Glyder Shock Absorbing Ball Mount #325-GH-12001 is not the right fit for your setup. Since your Tundra's receiver measures 18 inches from the ground and your TAB…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 8

Hello Travis, Thanks for writing in! Your father-in-law's Demco Autoslide 5th Wheel Trailer Hitch for Dodge Ram - Single Jaw - Above Bed - 18,000 lbs #DM59XV is built to mount to industry-standard above-bed rails, so it won't drop right into…

view full answer...

Answer 9

Hey Don, thanks for reaching out! The correct fit for your 2024 Ford F-250 with the Tremor package is the Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR. I confirmed with my contact at Hellwig that this will fit specifically with your Tremor…

view full answer...

Answer 10

Hey Michael, this is a great question but the difference between the TST TPMS part #TST44VR and the part #TST-507-RV-4-C is just the display. The part #TST-507-RV-4-C is a display with buttons along the side of it it to make changes whereas the part…

view full answer...

Answer 11

Hi David, I just want to make sure we're talking about the same type of hitch. The B and W Conversion Hitch part #BW55RV is designed to replace the pin box on a fifth wheel trailer and convert it to a gooseneck connection. Since your 2022 ATC…

view full answer...

Answer 12

The B&W Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches - 10 Bolt #BWRVR3200 will fit your 2018 Ford F-250 with aluminum bed but B&W doesn't recommend it. You will want to use some sort of spacers/isolators that…

view full answer...

Do the Truck Hero TS Rais Work with the Gator EFX Covers

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching