Towing Capacity and Parts Needed to Tow With 2017 Subaru Outback
Updated 08/03/2020 | Published 07/31/2020 >
Products Featured in This Question
Question:
I own a 2017 Outback, 4 cylinder. At present, there is no towing equipment installed. According to the owners manual the cars towing capacity is 2,700 pounds. My wife and I have an interest in possibly acquiring a small travel trailer. However, we are basically clueless on the topic. We have visited a number of dealers to look at trailers but seem to walk away with a nagging doubt as to whether or not the vehicle can really handle a small trailer minimum requirement of a small kitchenette and wet bath. Can someone give us the low down on exactly what the vehicle is capable of doing and what we would need to add to the car to make it all work.
asked by: Fred L
Expert Reply:
When it comes to towing capacities we use the same resource that you mentioned, the owner's manual, as the vehicle manufacturer has the definitive say on towing capacities. For your 2017 Subaru Outback you were correct that the maximum towing capacity is 2,700 lbs, so long as the trailer has brakes, and 1,000 lbs without brakes, but for a small camper, those are almost certainly going to have brakes.
What that means is pretty simple - the trailer, when fully loaded, cannot exceed 2,700 lbs. So for a trailer what you're looking for is one with a GVWR - Gross Vehicle Weight Rating - of no more than 2,700 lbs, or maybe a little more depending on how much you load it, to ensure your Outback can safely tow it. There are plenty of options for smaller trailers in this weight range so just keep the GVWR in mind.
Once you do have a trailer picked out you'll only need a trailer hitch receiver, wiring, ball mount, and brake controller if the trailer has electric brakes. For the ball mount you will need to have the trailer to ensure the right rise or drop, so I have added a link to a help article on how to measure to ensure you have the right one, as well as a link to our selection of ball mounts. Otherwise, the parts I recommend for your 2017 Subaru Outback are the following:
- Draw-Tite Max-Frame Trailer Hitch Receiver # 75673
- T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118467
For a trailer with electric brakes you will also need:
- Universal Installation Kit for Trailer Brake Controller # ETBC7
- Tekonsha Prodigy P3 Trailer Brake Controller # 90195
I have added links to some video reviews and installs for you to check out as well.
Product Page this Question was Asked From
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media




Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Choose the Right Trailer Hitch Class
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: What Hitch Will Fit My 2012 GMC Savana 3500 4.8L V8 Built on a Cutaway Chassis?
- Q&A: What is the Difference Between the Tekonsha Prodigy P2 and the P3 Brake Controllers
- Q&A: Activating 7-Way of 2020 Ford Explorer Police Interceptor
- Q&A: Hitch, Weight Distribution and Brake Controller Recommendations for a 2017 Toyota Sienna XLE

