Replacement Hubs for Karavan 2004 Double PWC Trailer
Updated 07/30/2020 | Published 07/28/2020 >
Products Featured in This Question
Question:
Can you tell me if this assembly will work on a 2004-2005 Karavan double PWC trailer?
asked by: Susan I
Expert Reply:
In order to determine which hubs will work on your 2004-2005 Karavan jetski trailer you will need to know the axle capacity, bolt pattern and the number on the bearings that are inside your current hub. I've found some similar trailers in my research that use a # L44649 inner and outer bearing and a 5 on 4-1/2 bolt pattern, but you will want to confirm this is the same on your trailer by removing the hubs and checking. The # AKIHUB-545-2-1K you were looking at has the 5 on 4-1/2 bolt pattern but uses a slightly different bearing, so it's not going to be a match for you unless you were to find # L44643 bearings when you check.
For a kit with L44649 bearings you can use Dexter Trailer Hub Assembly # 8-258-5UC1. This kit is for 2200-lb axles, 13- to 15-inch wheels and has a 5 on 4-1/2 bolt pattern. It includes the idler hub, bearings, races, seal and grease cap. If these characteristics match your existing hubs then this will work for you.
If you find completely different bearings in your current hub, just let me know what you find and I can help you locate the correct replacement hubs.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Looking For Replacement For Karavan PWC Trailer Part 310-03012BRP-ZN
- Search Results: r20384ez
- Search Results: dot reflective tape
- Search Results: spindle
- Search Results: trailer spindles
- Video: Detailed Breakdown of the Replacement Superwinch Rubber Handheld Remote, 15'
- Shop: Replacement Plug-In Remote for Bulldog Powersport Series UTV Winch - 12' Long
- Shop: Replacement Superwinch Handheld Remote - Old-Style Plug - 15'
- Shop: Replacement Superwinch Rubber Handheld Remote, 15'
- Shop: Replacement Handheld Remote for Superwinch Tiger Shark Series, LP Series, and UT Series Winches
- Q&A: Replacement Handheld Remote For a Older 4500 Series SuperWinch
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Shop: #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Search Results: trailer wiring
- Shop: Suspension Enhancement
- Shop: Brake Controller
- Shop: Gooseneck Hitch
- Shop: Fifth Wheel Hitch
- Q&A: Replacement Hub Recommendation for Tracker Boat Trailer with Spindles that Measure 1.05 inch
- Q&A: Reverse Lights for 2018 Ranger Bass Boat Trailer
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement Galvanized Hub For a Dexter 8-259 with a 1" Straight Spindle
- Q&A: Replace Hub Assemblies With Bearing Buddies For A 2,000 Lb. Trailer Axle
- Q&A: Replacement For TDE LP75 Disc Brake Actuator
- Article: Spring Towing Readiness Checklist


